Rotates 360°.
Self-lubricated bearing.
Heavily plated non-corrosive steel construction.
Dimensions: 7" X 7".

Table pedestal. Attractive polished aluminum design. Locks at any height from 14-1/2" to 30-3/4". 9" diameter. Weight: 9.5 lbs.

Trigger-Start torch head - TS4000.
One-click instant-on trigger igniter for easy lighting.
May be locked on for continuous use.
Emits a hot, efficient flame.
Uses propane or propylene fuel (MAP-Pro).

Poly vinyl end cap assembly. End bells. For 4" roller. 1/2" shaft. PVC color: Amber.

Poly vinyl bow roller assembly. 3" long. 1/2" shaft. PVC color: Amber.

Poly vinyl keel roller assembly. Spool-style shape. 5" long. 5/8" shaft. PVC color: Amber.

Poly vinyl keel roller assembly. Spool-style shape. 4" long. 5/8" shaft. PVC color: Amber.

Poly vinyl "V" bow stop. Absorbs shock, cut resistant. Will not mar your boat's surface. 3". For 1/2" shafts. PVC color: Amber.

Poly vinyl bow roller assembly. 4" long. 1/2" shaft. PVC color: Amber.

Low profile seat slide. Allows helm or boat seats to adjust fore and aft. Slide mounts under seat (between seat and pedestal base). Convenient handle provides solid locking at any position. Compatible with most 360° spiders. Designed for wobble-free operation. Anodized aluminum with stainless steel hardware. Spider swivel casting not included. Weight: 7 lbs.

Poly vinyl end cap assembly. End bells. For 3" roller. 1/2" shaft. PVC color: Amber.

Replacement seat slide plate. For use with Garelick boat seats. Accepts 99023 and 99235 swivels. Aluminum construction. Dimensions: 13" X 7.875" X 3/16". Mounting hole pattern: 12.5" x 5". Weight: 2.5 lbs.

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 4".

Bronze construction. Size: 0. Length: 2-1/8". Snap opening: 1/4". Eye diameter: 7/16". Display packaged.

Stainless steel. Size: 3. Length: 4-5/8". Snap opening: 1/2". Eye: 7/8". Display packaged.

Megapro pocket-sized electronics screwdriver.
Compact and designed for electronics and computer parts.
Comes with special small Phillips, square, and flat bits.

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 2-1/8". Leg length: 4"

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 3-1/8". Leg length: 3".

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 3-1/8". Leg length: 4".

Screw-out deck plate with an internal collar. 
ABS construction. 
Molded with a collar on the bottom. 
May be attached to hold deck plate bags. 
Hull installation requires silicone sealant. 
Overall diameter: 5-3/4". 
Opening: 4-7/16". 
Color: Black. 
Display packaged.

2" wide nylon webbing. Heavy-duty zinc plated steel snap hook. One end is plain end for threading onto a winch. Rated for 4000 lbs.

Bends so you can tighten screws from any angle.
Reaches awkwardly-placed screw heads, up to 90°.
Perfect for tightening hose clamps.
Size: 9/32" (7mm).

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 3-1/16". Leg length: 3-13/16".

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 1/2", 13 threads per inch. Between each leg: 2-1/16". Leg length: 4-13/16".

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 7/16", 14 threads per inch. Between each leg: 2-1/16". Leg length: 2-5/16".

Used for mounting brackets to trailer frame. Galvanized steel to help prevent rusting. Rod width: 7/16". Between each leg: 2-1/16". Leg length: 4-5/16".

Bronze construction. Size: 3. Length: 4-3/8". Snap opening: 9/16". Eye diameter: 3/4". Display packaged.

Stainless steel. Size: 0. Length: 2-1/16". Snap opening: 1/4". Eye: 7/16". Display packaged.

Lever type load binder. Painted red. For 5/16" - 3/8" chain. Rated for 5,400 lb. Allows for quicker application of load than a ratchet.

Wood scraper All-metal construction. Four edges on a 1-1/2" blade. Features an aggressive camber ground blade. Weight: .44 lb.

Features a patented pullout bit cartridge
Makes it easy to find, change and store bits.
Handle is made from engineered nylon/ABS resin.
Shaft opening serves as a 1/4" hex driver.
Alloy steel shaft.
Palm saver cap keeps you from getting blisters.
Comes with 15 bit tips:
- Point types: double-ended, Phillips, square, flat, Torx.
- Tip types: Phillips, square awl, valve stem, slotted, 5/16" miniature nut driver.

Wood scraper. All-metal construction. Four edges on a 2-1/2" blade. Features an aggressive camber ground blade. Weight: .7 lb.

Boat stand top. For replacement or changing existing boat stands. Solid ACME threaded rod. Fully adjustable under load. Durable steel construction. Length: 27". Weight: 18 lbs. NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.  Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Designed for sharpening saws or finishing metal. Single cut on sides and edges. Two square edges. Length: 10".