Rigid eye, double sheave pulley. Standard nickel finish. Solid brass sheave. One-piece construction with triple copper/nickel plating. Sheave size: 1" Maximum rope size: 5-16" Load limit: 25 lbs. Weight: .24 lbs.

HI-LIP design. Aluminum sheave. Hook is forged steel, galvanized with safety catch. Tapered roller bearings. Cast-in labyrinth shields. Sheave diameter: 5". Overall block height: 17-1/4". Capacity: 2,000 lb.

Use for all heavy wire hog rings. Wide, adjustable jaw.

Megapro Hex 15-in-1 multi-bit screwdriver.
Features a patented pullout bit cartridge.
Makes it easy to find, change and store bits.
Handle is made from engineered nylon/ABS resin.
Shaft opening serves as a 1/4" hex driver.
Alloy steel shaft.
Palm saver cap keeps you from getting blisters.
Comes with 14 standard hex drive tips.

ABS construction. Hull installation requires silicone sealant. Overall diameter: 6-3/4". Opening: 5-7/16". Color: Black.

Screw-pin anchor / bow shackle. Complies with Federal Specification RR-C-271b. Galvanized steel. Thickness: 5/8". Shackle pin: 3/4". Working load limit: 3-1/4 ton.

Screw-pin anchor / bow shackle. Complies with Federal Specification RR-C-271b. Galvanized steel. Thickness: 3/4". Shackle pin: 7/8". Working load limit: 4-3/4 ton.

Screw-pin anchor / bow shackle. Complies with Federal Specification RR-C-271b. Galvanized steel. Thickness: 1/2". Shackle pin: 5/8". Working load limit: 2 ton.

Screw-pin anchor / bow shackle. Complies with Federal Specification RR-C-271b. Galvanized steel. Thickness: 7/16". Shackle pin: 1/2". Working load limit: 1-1/2 ton.

Screw-pin anchor / bow shackle. Complies with Federal Specification RR-C-271b. Galvanized steel. Thickness: 3/8". Shackle pin: 7/16". Working load limit: 1 ton.

Injection-molded ABS and polycarbonate construction.
Designed to allow visual inspection inside of watertight compartments.
Black deck plate; black cover.
Clear opening diameter: 6-1/2".

The manufacturer suggests that this deck plate should be installed with silicone sealant.
Lubricate the lid's threads with Teflon grease or Vaseline; clean with hot soapy water.
Avoid contact with acetone and other similar solvents.

Screw-pin anchor bow shackle. Complies with Federal Specification RR-C-271b. Galvanized steel. Thickness: 3/16" Shackle pin: 1/4". Working load limit: 1/3 ton.

Hammerlock shackle. Consists of three parts: 2 part fixture and pin. Must be used with locking spacer. Used for linking two chains or cables together. Size: 1/2". Working load: 12,000 lb.

Used with LP gas detector unit and panel.
Simple to install.
Length: 10 feet.

Brass construction. Size: 1/8" X 1/4".

Screw-pin anchor / bow shackle. Complies with Federal Specification RR-C-271b. Galvanized steel. Thickness: 1". Shackle pin: 1-1/8". Working load limit: 7-1/2 ton.

Screw-pin anchor / bow shackle. Complies with Federal Specification RR-C-271b. Galvanized steel. Thickness: 7/8". Shackle pin: 1". Working load limit: 5 ton.

General purpose chain. Standard commercial quality chain. Low-carbon steel. Galvanized and proof tested. 400 feet per drum. Diameter: 3/8". Working load limit: 2650 lbs. Weight: 1.38 lbs. per foot.

Manual start spark lighter. Includes several replacement flints. Simple one-hand operation for igniting torches. Weight: .5 lbs.

Display packed AISI 304 stainless Bar Width: 1/4" Length: 1" Weight: .02 lb

Bronze construction.
Eye size: 3/8".
Length: 2-9/16".
Display packaged.

Asymmetrical snap hook with eye insert. Stainless steel. Thickness: 3/8". Length: 4". Eye size: 9/16". Snap opening: 11/16". Breaking strength: 3600 lb. Display packaged.

For those hard-to-reach places.
Locks into screwdriver shafts.
10" extension.

Rigid eye, double sheave pulley. Standard nickel finish. Solid brass sheave. One-piece construction with triple copper/nickel plating. Sheave size: 3/4" Maximum rope size: 1/4" Load limit: 40 lbs. Weight: .17 lbs.

Zinc-plated.
Designed to outlast any conventional shaft.
Zerk grease fitting on each end for easy lubrication.
For use with keel rollers, spool rollers, or bow rollers.
Includes E-clips.

Fits a 5" roller.

Size: 5/8" X 6-1/4".

Rigid eye, double sheave pulley. Standard nickel finish. Solid brass sheave. One-piece construction with triple copper/nickel plating. Sheave size: 1" Maximum rope size: 5/16" Load limit: 55 lbs. Weight: .2 lbs.

Rigid eye, double sheave pulley. Standard nickel finish. Solid brass sheave. One-piece construction with triple copper/nickel plating. Sheave size: 1-1/2" Maximum rope size: 3/8" Load limit: 90 lbs. Weight: .4 lbs.

Zinc-plated.
Designed to outlast any conventional shaft.
Zerk grease fitting on each end for easy lubrication.
For use with keel rollers, spool rollers, or bow rollers.
Includes E-clips.

Fits a 12" roller.

Size: 5/8" X 13-1/2".

Zinc-plated.
Designed to outlast any conventional shaft.
Zerk grease fitting on each end for easy lubrication.
For use with keel rollers, spool rollers, or bow rollers.
Includes E-clips.

Fits a 10" roller.

Size: 5/8" X 11-1/8".

Steel electrogalvanized Pin Size: 1/4" Length: 3" Weight: .07 lb

C.S. Osborne sail palm.
No. 265.
Left handed.
A fine quality leather palm.
Vinyl and iron thimble for sewing.

Stainless steel. Outer mounting plate is crimped in place. Includes adjustable finish nuts. Dimensions: 5/16" X 2". Display packed.

A hardened steel tip for a long life with less stripouts. Square #2 head. 6" length.

For making even bends in copper tubing. Spring type. Diameter: 3/8".

For making even bends in copper tubing. Spring type. Diameter: 5/8".