Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
S2K Commerce - Products Dropdown
Actions
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
S2K Commerce - Order Entry
ActionsBattery clips
Copper-plated, black/red rubber handles. Size: 3" X 1". Rated for 30 amps.
Item#:
SSN50031702
Manufacturer:
SeaSense
Available:
Out of Stock
4.6700
Your Price:
3.97
EACH
Call to Order
Rugged aluminum case.
Ignition protected.
Designed to be efficient and simple to use.
Provides charging for up to three battery banks.
Rated for total output current 40A.
Maximum output voltage 16 volt DC.
M6 studs.
Outputs: 1 negative, 3 positive.
May be used with AGM, flooded lead acid, gel, or TPPL batteries.
Recommended for battery bank size: 440Ah Maximum, 60Ah minimum.
Item#:
BLS7532
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
1370.3100
Your Price:
1096.25
EACH
Universal battery charger
Energizer Recharge® universal battery charger.
Charges up to four AA/AAA/C/D or two 9V NiMH rechargeable batteries.
Auto shut-off.
Charges 4 AA batteries in 3 hours.
Easy-to-read LCD screen shows charging status of the batteries inside.
Provides a full charge.
Item#:
EVECHFCEN
Manufacturer:
Kidde / Eveready Energizer
Available:
Out of Stock
71.2600
Your Price:
57.01
EACH
Call to Order
On-board battery charger
6 amp / 12 volt 1 bank 120V input on-board battery charger.
Charge 12V flooded and AGM batteries, group 24 through 31 (up to 120 Amp-Hr).
Microprocessor controlled for accurate charging.
Universal input 120/230V input for go-anywhere freedom
Intuitive operation.
Isolated outputs.
Outputs can be put in series or parallel for higher voltage or current.
Completely sealed, epoxy filled.
IP68 waterproof.
Designed for harsh marine and industrial environments - moisture, salt, shock and vibration tested.
Non-corroding housing for ultimate reliability.
ConnectCharge plug for easy assembly to inlet (Marinco #150CCI) with no wiring.
4' DC output cable, 18 gauge wires, SJTOW with ring terminal connection.
Dimensions: 3.5"H x 6.4"W x 2.42"D.
Item#:
MRN28106
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
173.2200
Your Price:
138.57
EACH
On-board battery charger
10 amp / 12/24 volt 2 bank 120 volt input on-board battery charger.
Charge flooded and AGM batteries, group 24 through 31 (up to 120 Amp-Hr).
Microprocessor controlled for accurate charging.
Universal input 120/230V input for go-anywhere freedom.
Intuitive operation.
Sense-Send technology senses the power needs of each battery and sends correct charge.
Isolated outputs.
Outputs can be put in series or parallel for higher voltage or current.
Completely sealed, epoxy filled.
IP68 waterproof.
Designed for harsh marine and industrial environments - moisture, salt, shock and vibration tested.
Non corroding housing for ultimate reliability.
ConnectCharge plug for easy assembly to inlet (Marinco #150CCI) with no wiring.
4' DC output cable, 14 gauge wires, SJT with ring terminal connection.
Dimensions: 5.5"H x 7.8"W x 2.4"D.
Item#:
MRN28210
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
276.3000
Your Price:
221.04
EACH
Power station battery unit
External terminals for easy recharging. Has a battery condition indicator Accommodate the 24 and 27 series batteries.
Item#:
SSN50090682
Manufacturer:
SeaSense
Available:
Out of Stock
104.1100
Your Price:
88.50
EACH
Call to Order
Battery box
Injection molded polypropylene battery box is vented and comes complete with strap and brackets.
Holds 24 series batteries.
Dimensions: 14"L X 9-5/8"W X 10-5/8"H.
Item#:
SDG415024
Manufacturer:
Sea-Dog Corp
Available:
In Stock
18.5500
Your Price:
13.17
EACH
15 amp battery charger.
Three bank, 5/5/5 amp 12V/24/36V DC output charger with 90-135V input range.
Dedicated battery charging, sensing and control per bank.
Easy to read graphics indicate the status of each battery bank through the charging process.
Low profile flangeless extruded aluminum housing is sealed by gaskets with heavy duty end
caps for 100% waterproof performance to IP67.
All high frequency, digital charging technology.
Microprocessor and software control for precision, fully automatic 5-stage performance charging.
Auto-maintain energy saver mode.
100% waterproof (IP67) and shock resistant for all fresh and saltwater applications.
Pre-wired for easy installation.
Built-in safety: reverse polarity, over-current, over-voltage, over temperature and ignition protection.
In-line fuses for maximum DC wire protection.
Battery type: 12V flooded and AGM.
Dimensions: 7.5"W x 2.4"H x 12.9"L.
Item#:
GES2713A
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
324.1900
Your Price:
259.35
EACH
Roto-molded battery box - 4D
4D battery box.
Non-corrosive high-strength polyethylene construction.
Resists chemicals and rust.
Scalloped cable entry/exit points on all four sides.
.185" thick walls.
Dimensions: 23.63"L X 12.50"W X 14.13"H.
Fits batteries to: 20.50"L X 9.25"W X 9.5"H.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive. Please contact Seattle Marine at 1-800-426-2783 for shipping options.
Item#:
MOE042204
Manufacturer:
Moeller Marine
Available:
In Stock
194.2900
Your Price:
165.15
EACH
High profile battery box - 8D
High profile 8D battery box.
Non-corrosive high-strength polyethylene construction.
Resists chemicals and rust.
Scalloped cable entry/exit points on all four sides.
.185" thick walls.
Dimensions: 24.50" L X 14.50" W X 14.5" H.
Fits batteries to: 21.0" L X 11.25" W X 9.75" H.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive. Please contact Seattle Marine at 1-800-426-2783 for shipping options.Item#:
MOE042209
Manufacturer:
Moeller Marine
Available:
In Stock
221.1200
Your Price:
187.95
EACH
Low profile battery box - 8D
Low profile 8D battery box.
Non-corrosive high-strength polyethylene construction.
Resists chemicals and rust.
Scalloped cable entry/exit points on all four sides.
.185" thick walls.
Dimensions: 24.75"L X 14.88"W X 11.5"H.
Fits batteries to: 21.50"L X 11.50"W X 9.62"H.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive. Please contact Seattle Marine at 1-800-426-2783 for shipping options.Item#:
MOE042208
Manufacturer:
Moeller Marine
Available:
In Stock
206.3000
Your Price:
175.35
EACH
Battery terminal covers
Black and red flexible PVC terminal covers.
Meets Coast Guard safety regulations for anti-short protection.
Accepts up to 1/2" O.D. cable.
Item#:
MOE099078-10
Manufacturer:
Moeller Marine
Available:
Out of Stock
15.6200
Your Price:
13.27
EACH
Call to Order
Guest 2720A 20 amp battery charger
Two bank, 10/10 amp 12V/24V DC output charger with 90-135V input range.
Dedicated battery charging, sensing and control per bank.
Easy to read graphics indicate the status of each battery bank through the charging process.
Low profile flangeless extruded aluminum housing is sealed by gaskets with heavy duty end
caps for 100% waterproof performance to IP67.
All high frequency, digital charging technology.
Microprocessor and software control for precision, fully automatic 5-stage performance charging.
Auto-maintain energy saver mode.
100% waterproof (IP67) and shock resistant for all fresh and saltwater applications.
Pre-wired for easy installation.
Built-in safety: reverse polarity, over-current, over-voltage, overtemperature and ignition protection.
In-line fuses for maximum DC wire protection.
Battery type: 12V flooded and AGM.
Dimensions: 7.5"W x 2.4"H x 12.9"L.
Item#:
GES2720A
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
324.1900
Your Price:
259.35
EACH
Battery box strap and brackets
1-9/16" wide woven polypropylene strap.
Injection molded nylon buckle and brackets.
Four #8 FH fasteners.
Length: 54".
Display packed.
Item#:
SDG415094-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
7.3900
Your Price:
5.25
EACH
Battery box strap
1" wide woven polypropylene strap.
Stainless steel buckle, two chrome plated brass brackets, & four #8 FH fasteners.
Length: 4'.
Display packed.
Item#:
SDG415082-1
Manufacturer:
Sea-Dog Corp
Available:
In Stock
14.1700
Your Price:
10.06
EACH
Battery box
White 4D acid-resistant polyethylene construction battery box.
Heavy walled boxes are seamless for complete containment.
Most boxes are notched both at the top of the box and the lid, for connecting cables.
Battery box dimensions: 22-1/16"L X 9-9/16"W X 11-1/16"H .
Battery box with cover dimensions: 23"L X 10-3/8"W X 11-5/16"H.
Item#:
DYN4DBOX
Available:
In Stock
158.5300
Your Price:
134.75
EACH
25 amp total output current battery charger.
For battery types AGM, flooded lead acid, Gel, & TPPL (thin plate pure lead).
Recommended for battery bank sizes 330Ah maximum and 60Ah minimum.
Four stage, three output, dry mount design, for use in harsh environments.
Rugged, finned aluminum case.
PreFloat™ stage prevents over charging.
Power factor corrected for efficient use of AC.
Intuitive diagnostic screens.
User defined charge profiles and customizable settings
Provides charging for up to three battery banks.
Large, bright display.
Multi-language: English, French, German, Italian, Spanish.
Charge coordination with Blue Sea Systems automatic charging relays (ACR)
controls ACR state ensuring proper float stage for each battery.
Battery Temperature Compensation - adjusts charge voltage based on battery temperature.
AC over and under voltage shut down and automatic restart.
Over and under battery temperature protection - charger will not operate if battery
temperature rises above or falls below a set value.
DC over voltage and reverse polarity protection.
Surge and short circuit protection.
Item#:
BLS7531
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
1076.6400
Your Price:
861.31
EACH
Battery box
White 8D acid-resistant polyethylene construction battery box.
Heavy walled boxes are seamless for complete containment.
Most boxes are notched both at the top of the box and the lid, for connecting cables.
Battery box dimensions: 22-1/8"L X 12-1/4"W X 11-3/16"H.
Battery box with cover dimensions: 23"L X 12-7/8"W X 11-3/8"H.
Item#:
DYN8DBOX
Available:
In Stock
167.4100
Your Price:
142.29
EACH
10 amp battery charger.
Dual bank, 5/5 amp 12V/24 DC output charger with 90-135V input range.
Dedicated battery charging, sensing and control per bank.
Easy to read graphics indicate the status of each battery bank through the charging process.
Low profile flangeless extruded aluminum housing is sealed by gaskets with heavy duty end
caps for 100% waterproof performance to IP67.
All high frequency, digital charging technology.
Microprocessor and software control for precision, fully automatic 5-stage performance charging.
Auto-maintain energy saver mode.
100% waterproof (IP67) and shock resistant for all fresh and saltwater applications.
Pre-wired for easy installation.
Built-in safety: reverse polarity, over-current, over-voltage, overtemperature and ignition protection.
In-line fuses for maximum DC wire protection.
Battery type: 12V flooded and AGM.
Dimensions: 7.5"W x 2.4"H x 9.0"L.
Item#:
GES2711A
Manufacturer:
Marinco, Ancor, Guest, BlueSea
Available:
In Stock
251.4300
Your Price:
201.14
EACH
29-31 Series Battery Tray
Group 29-31 series battery tray.
Non-corrosive hi-strength plastic construction.
Self locking security knobs.
Stainless steel hold-down rods.
Dimensions: 16.19" L x 7.50" W x 11.50" H.
Holds batteries up to 13.00" L x 7.43" W x 10.00" H.
Non-corrosive hi-strength plastic construction.
Self locking security knobs.
Stainless steel hold-down rods.
Dimensions: 16.19" L x 7.50" W x 11.50" H.
Holds batteries up to 13.00" L x 7.43" W x 10.00" H.
Item#:
MOE042216
Manufacturer:
Moeller Marine
Available:
In Stock
34.2200
Your Price:
29.09
EACH
24 Series Battery Tray
Group 24 series battery tray.
Non-corrosive hi-strength plastic construction.
Self locking security knobs.
Stainless steel hold-down rods.
Dimensions: 12.88"L x 7.5"W x 9.70"H.
Holds batteries up to 11.75"L x 6.75"W x 7.75"H.
Item#:
MOE042215
Manufacturer:
Moeller Marine
Available:
In Stock
24.2900
Your Price:
20.65
EACH
Injection-molded battery box
Non-corrosive high-strength polyethylene construction.
Resists chemicals and rust.
Complete with hold-down strap and mounting hardware.
.185" thick walls.
For 27, 30, and 31 series batteries.
Holds batteries up to 12.75" X 7" X 9.00".
Dimensions: 16.37" X 9.5" X 11.37".
Resists chemicals and rust.
Complete with hold-down strap and mounting hardware.
.185" thick walls.
For 27, 30, and 31 series batteries.
Holds batteries up to 12.75" X 7" X 9.00".
Dimensions: 16.37" X 9.5" X 11.37".
Item#:
MOE042214
Manufacturer:
Moeller Marine
Available:
In Stock
19.5900
Your Price:
16.65
EACH
Injection-molded battery box
Non-corrosive high-strength polyethylene construction. Resists chemicals and rust. .185" thick walls. For 24 series batteries. Holds batteries up to 10.50" X 7" X 8.37". Dimensions: 14" X 9.62" X 10.75".
Item#:
MOE042213
Manufacturer:
Moeller Marine
Available:
In Stock
14.8700
Your Price:
12.64
EACH
Battery filler
Shuts off automatically when battery cell is a proper level. Double action fast flow valve tip that prevents after-drip. Stops the surface discharge caused by a wet battery. Safe to use with battery acid. 6" spout. 2 quart capacity.
Item#:
LUB75030
Manufacturer:
Lubrimatic
Available:
In Stock
20.6600
Your Price:
17.56
Wilmar battery tester
Test 6V, 12V and 24V batteries.
Dial indicator style.
Instant reading warm or cold.
Item#:
RELBT
Available:
In Stock
9.4000
Your Price:
7.99
EACH
Battery strap - 4'
1" wide weather-resistant polypropylene webbing.
Rust-resistant metal mounting hardware.
Stainless steel screws.
Length: 4'.
Item#:
EPOBS1
Manufacturer:
Epco / Gator Tuff
Available:
In Stock
8.2500
Your Price:
7.01
EACH
Heavy-duty battery box - 4D
4D standard battery box.
Seamless, heavy-walled polyethylene construction.
Provides superior chemical resistance.
Full-flow ventilation ensures adequate cooling.
Dimensions: 24"L X 13"W. X 13-1/2"H.
Fits batteries to: 20.5"L X 9.5"W X 11.5"H.
Item#:
TOD902138
Manufacturer:
Todd Marine Products
Available:
Out of Stock
181.7200
Your Price:
154.46
EACH
Call to Order
Heavy-duty battery box - 8D
8D low profile battery box.
Seamless, heavy-walled polyethylene construction.
Provides superior chemical resistance.
Full-flow ventilation ensures adequate cooling.
Dimensions: 25"L X 15"W X 12"H.
Fits batteries to: 21.5"L X 11.5"W X 9.5"H.
NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive. Please contact Seattle Marine at 1-800-426-2783 for shipping options.Item#:
TOD902169
Manufacturer:
Todd Marine Products
Available:
In Stock
201.6600
Your Price:
171.41
EACH
Battery terminal/post cleaner
Performance Tool metal battery terminal and post cleaner.
Stainless steel brushes.
All metal construction.
Stainless steel brushes.
All metal construction.
Item#:
RELBTB
Available:
In Stock
6.0000
Your Price:
5.10
EACH