Aluminum body repair filler, for metal surfaces.

Has excellent corrosion resistance properties.
Adheres well to galvanized steel and aluminum.
W ill not sag: known as "the nearest thing to lead".

Moisture proof. Easily sands to a fine feather edge.

Metal-2-Metal liquid reactor included.

Size: 1 qt.

The original polyester glazing putty.
 
Can be applied directly to bare metal, body filler, fiberglass and fully cured sanded top coats.
Easily fills grind marks, pinholes, low spots and other minor imperfections.

Contains ZNX-7 for superior adhesion to galvanized steel, bare steel, aluminum, SMC, E-Coat and OEM finishes.

No shrinkage.
Easy dry.
Reduces risk of staining.

Blue cream hardener included.

20 oz.

Quick hardening, non-separating, cream hardener.
Formulated for use with body fillers, specialty fillers and polyester finishing putties.
Color: White.
Size: 4 oz.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 1.5 quarts.

A lightweight, fast-curing, two-part epoxy putty.
For filling and smoothing surface imperfections.
Safe for use above and below the waterline.
An integral part of Pettit's gelcoat blister repair system.
Also used for leveling metal keels or other underwater areas.
Excellent chemical and water resistance.
Non-sagging, non-shrinking and easy to apply.
Color: Off-white.
Size: 8.5 ounces.

Unique vinylester formula designed with short strand fiberglass for semistructual repairs, above and below waterline Repairs areas of fiberglass hulls, decks, and other parts Cures tack-free in 30 minutes Weight: 11.58 lbs

Unique vinyl ester formula. For semistructual repairs, above or below waterline. Fixes fiberglass hulls, decks, and other parts. Cures tack-free in 30 minutes. Color: Off-white. Size: 1 qt.

Premium filler is tack-free and stain-free.

Reduces risk of staining top coats Will not load or clog sandpaper.
No "cheese grating" needed.

Cures to non-tacky surface in 15-20 minutes.

Blue cream hardener included.

Paintable, non-toxic sealant that is pliable and soft. It can be used on oddly shaped gaps and holes. Does not damage or corrode plastic or metal. 1 lb. block.

Fix repair putty. A non-sagging repair putty that cures like steel. May be used underwater. Once cured, Fix putty may be drilled, sanded and painted. Bonds well to fiberglass, wood, metal, glass and concrete. Easily cleaned up with soap and water (before cure). Size: 3 oz. Weight: .2 lb.

Handi-Foam P10749 spray foam kit. A small, portable quick-curing polyurethane foam system. Stops air infiltration and insulates well. Expands in a 4-to-1 ratio. Kit includes eight nozzles, two components, required hoses and a dispensing gun. Not tacky to the touch in approximately five minutes, cures completely in one hour. Covers 605 board-feet (12" X 12" at 1" thickness). Weight: 111 lbs.

Handi-Flow Pour-in-Place Slow-Rise fill and insulate kit. Designed to fill large voids and blind cavities. Recommended for docks, buoy filling and boat flotation. Insulates, adds structural support and buoyancy. Prevents vibrations and deadening sound. A chemically-cured system, with a slower cure time than Handi-Foam spray foam systems. Expands in a 5-to-1 ratio. Kit includes eight nozzles, two components, required hoses and a dispensing gun. Fills 13 cubic feet.

Handi-Foam P10720 spray foam kit. A small, portable quick-curing polyurethane foam system. Stops air infiltration and insulates well. Expands in a 4-to-1 ratio. Kit includes two nozzles, two components, required hoses and a dispensing gun. Not tacky to the touch in approximately five minutes, cures completely in one hour. Covers 205 board-feet (19 square meters). Weight: 41 lbs.

Polyurethane insulating foam sealant in an aerosol can. A one-part, moisture-curing, polyurethane foam. Expands to fill and seal large gaps and cavities. Stops air infiltration and will not shrink or degrade. Contains a flame retardant. Waterproof. Color: Tan. Size: 12 oz.

Industrial thermal-insulating coating. Designed to reflect/absorb radiant heat. Uses ceramic particulates and entrapped air to insulate. Prevents corrosion and stops radiant heat transfer. Size: 5 gal.

Fan-shaped nozzles for Handi-Foam spraying systems.
Expels foam in an "ultra-wide" vertical spray pattern.
Designed to be used where extensive areas need coverage.
Since proper temperature is key to correct foam application, ColorWise nozzles will turn blue when the chemicals being sprayed is too cold.

Eight nozzles per package.
Includes petroleum jelly for lubrication and operating instructions.

Cone-shaped nozzles for Handi-Foam spraying systems.
Cone nozzles are ideal for applications that require smaller, direct spray application.
Since proper temperature is key to correct foam application, ColorWise nozzles will turn blue when the chemicals being sprayed is too cold.

Eight nozzles per package.
Includes petroleum jelly for lubrication and operating instructions.

A patented closed-cell window and door foam seal. Will not distort windows or doors. Prevents moisture and mold problems by repelling water. Applied with a straw applicator. Size: 24 oz.

Industrial thermal-insulating coating. Designed to reflect/absorb radiant heat. Uses ceramic particulates and entrapped air to insulate. Prevents corrosion and stops radiant heat transfer. Size: 1 gal.

Handi-Foam P10700 spray foam kit. A small, portable quick-curing polyurethane foam system. Stops air infiltration and insulates well. Expands in a 4-to-1 ratio. Kit includes eight nozzles, two components, required hoses and a dispensing gun. Not tacky to the touch in approximately five minutes, cures completely in one hour. Covers 105 board-feet (9.8 square meters). Weight: 24 lbs.

Designed to fill and seal small cracks and gaps. May be applied with a straw or professional hose kit. Creates a rigid closed-cell foam barrier. Helps seal out drafts, noise, moisture and air. Size: 24 oz.

Designed to fill and seal small cracks and gaps. May be applied with a straw or professional hose kit. Creates a rigid closed-cell foam barrier. Helps seal out drafts, noise, moisture and air. Size: 12 oz.

A spray solvent used to dissolve uncured foam. Also attachs to Fomo sealant dispensing units. Used primarily for flushing Fomo lines and units. May also be used for other industrial cleaning purposes. Size: 12 oz.

A durable, solvent-resistant foam dispensing unit.
Squeeze trigger allows for precise control.
Barrel length: 7".
Smooth dispenser tip.