A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: Gray.
Size: 1 quart kit.

Anticorrosive primer for underwater metal. Great for running gear and lower units. Superb corrosion barrier, reduces metal pitting. Usable over incompatible or unknown antifouling paints. Matte finish. Apply below waterline. Color: YPA984 Gray. Size: 1 quart.

An anti-corrosive primer for underwater metal surfaces. Provides an excellent barrier to reduce pitting. Great for use before antifouling paint on fiberglass.

An "All-in-One" primer.
Single-part multipurpose primer for above the waterline.
Combines the features of separate substrate primers in one.
Adheres well to wood, fiberglass, metals on bare or painted surfaces.
Excellent covering capability, high build, good grain filling.
Provides corrosion protection on steel.
Color: White.
Size: 3/4 liter.

ePaint epoxy primer converter.
Must be mixed with ePaint EP-PRIME resin.
Gives extraordinary corrosion resistance.
Used for prepping surfaces for ePaint bottom coating.
Size: 1 qt.

Single-component low VOC universal primer.
May be used on both ferrous and galvanized metal.
Fast-drying properties.
Excellent corrosion resistance.
May be top coated.
Lead and chromate free.
High volume of solids.
Color: White.
Size: 1 gal.

A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: White.
Size: 1 gallon kit.

A unique two part epoxy primer coating.
Helps to prevent and repair gelcoat blistering.
Protects fiberglass hulls from water absorption.
Gives excellent barrier coat protection.
Contains "micro-plates" for extra protection.
Works as an anti-corrosive substrate primer for metals.
Dries quickly, with a short re-coat time.
Color: White.
Size: 1 quart kit.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 1 gal. Coverage: Approximately 200 square feet, at 10 mil.

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 5 gal. Coverage: Approximately 1000 square feet, at 10 mil.

Provides excellent protection for bare metals by inhibiting corrosion.
Useful on aluminum, steel, iron, copper, bronze, lead, and more.
Forms a strong bond with underwater metals and running gear.
Dries to a smooth layer of zinc film, which will self-clean.
May be used above or below the waterline.
Size: 1 quart.
Color: Gray.

A two-part water-based epoxy primer / sealer.

May be used on concrete, masonry, fiberglass, wood and previously painted substrates.
This primer is recommended for your projects with Tuff Coat for proper adhesion.
Simple 1:1 mix.

1 gallon kit.

Amercoat 302 reinforced inorganic zinc primer. Zinc-rich primer used for protecting steel. Used on tanks, equipment, piping, ships, barges, Easily applied, low VOC, fast-dry. Provides outstanding corrosion resistance. Pre-mixed with zinc dust Mixing ratio, by volume: 1 part cure to 9 parts resin.

A multi-purpose two-part epoxy primer.
Suitable for use under all Interlux topside finishes
It can be used to resurface cracked and crazed gelcoat, and over clear epoxies to eliminate the effects of amine blush.
Size: 1 qt.

An "All-in-One" primer.
Single-part multipurpose primer for above the waterline.
Combines the features of separate substrate primers in one.
Adheres well to wood, fiberglass, metals: bare or painted surfaces.
Excellent covering capability, high build, good grain filling.
Provides corrosion protection on steel.
Color: Gray.
Size: 3/4 liter.

Single-component air-drying primer. For wood, based on alkyd resin. Undercoat for bare wood surfaces above the waterline. For interior or exterior use. Excellent build and sandability. Color: White. Size: 750 ml.

ePaint Multi-Purpose epoxy primer.
A robust, easy-to-use two part primer.
Perfect as a base coat for ePaint antifouling paint.
Provides water migration and corrosion protection.
Compatible with bottom paints, easy to apply.
Size: 1 gal.
Color: Red.

Adheres to ferrous metals: steel, cast iron, galvanized and stainless.
Protects against corrosion.
Wets, seals, and adheres to firmly attached rust.
Dries rapidly, allows multiple coats in 1 day.

Adheres to ferrous metals: steel, cast iron, galvanized and stainless.
Protects against corrosion.
Wets, seals, and adheres to firmly attached rust.
Dries rapidly, allows multiple coats in 1 day.

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 quart kit

Converts rust into a barrier layer of magnetite. A bonding agent for epoxy, acrylic, and oil-based finishes. Gives exceptional bonding with moisture cured polyurethanes. May be used as a rust converter, or paint / etch primer. Eliminates the need to mechanically blast to white metal. Not for use with zinc chromates or zinc phosphates. Size: 1 qt. Coverage: Approximately 50 square feet, at 10 mil.

Inter-Prime wood sealant. Suitable for either interior or exterior use. Stops varnish from soaking into the wood and seals grain. Helps varnish or paint to dry without "high" and "low" spots Recommended for sealing plywood to resist cracking.

2 component epoxy-polyamide coating for use on sandblasted aluminum where maximum resistance to fresh or salt water is required
Smooth finish provides an excellent bonding surface for additional primers or topcoats
Excellent water, chemical and corrosion resistance for aluminum.
High performance Strontium chromate primer for all aluminum.
Size: .75 gallon kit.

White undercoated smoothes out any surface.
Base coat for aged, cracked, pitted surfaces
For fiberglass, wood, previously painted surfaces.
Dries quickly - easy to sand.
Use Pettit 120 brushing thinner.

White Easypoxy undercoater.
Smoothes out any surface.
A base coat for aged, cracked, pitted surfaces.
Use it on fiberglass, wood, previously painted surfaces.
Dries quickly and is easy to sand.
Mixes with Pettit 120 brushing thinner.
Size: 1 gallon.

Single-component low VOC universal primer.
May be used on both ferrous and galvanized metal.
Fast-drying properties.
Excellent corrosion resistance.
May be top coated.
Lead and chromate free
High volume of solids.

A heavy-duty two-part coating.
May be used on practically any part of a boat.
Excellent for protecting underwater metal from corrosion.
Forms a tight, durable chemical-resistant film.
56% solids by volume.
Size: 1 gallon kit

Inhibits corrosion: use only on bare metals!
For use above or below waterline.
Dried film is 93% zinc.
Do not apply anti-fouling paint over zinc coat.

A versatile, highly penetrating air drying oil.
Can be used alone or added to paint.
Used alone it provides a tough, flexible finish.
Drives out excess moisture and air to stop rust.
Fills dry porous wood to stop paint peeling.
When added to any oil or alkyd based coatings, it gives increased wet edge time and improved flowing and adhesion.
Size: 1 liter.

'Wood Flour' is ground and filtered natural bark. Mixes with epoxy to form a wood-colored, sandable surface. Simply add Wood Flour until desired consistancy is reached. Used when a hard solid for filling and filleting is required Size: 1 quart. Weight: .5 lbs.

Milled fibers (1/32" milled fiberglass). Used when epoxy must fill a void and provide extremely high strength and resistance to cracking. Ideal for structural filleting and hardware bonding. Simply add to mixed epoxy. Size: 1 quart. Weight: .1 lbs.

Phenolic micro balloons, organic phenolic hollow spheres.
Low density, lightweight epoxy additive.
Used when sandable, paint-ready surfaces are required.
Ideal for fairing.
Size: 1 qt.

CAB-O-SIL fumed colloidal silica.
Adds strength to epoxies.
Creates an extremely hard, high-density solid finish.
Ideal for structural bonding, filling, and filleting.
Simply add into mixed epoxy.
Absolutely clear finish when dry; no white residue.
Size: 1 quart.

Cell-O-Fill epoxy filler. A fibrous, all-natural cellulose epoxy additive. Reduces sagging and slumping when applying MAS epoxy. Will not billow in the air like silica. Comes as a non-toxic white powder. Size: 1 quart. Weight: 2 lbs.

Best known for its bridging capabilities in rebuilding shattered fiberglass and for reinforcing torn or rusted areas of sheet metal.
Formulated with long strands of chopped fiberglass.
Double the strength of standard fillers.
Waterproof and rustproof.
Can be used with or without fiberglass cloth or mat.
Should be finished with Rage or Metal Glaze.
Blue cream hardener included.