Use this butcher paper to mask off areas for painting projects.
18" wide.
180 feet long.
Color: Brown.

High temperature fineline masking tape.
Ideal for masking color separations on plastic.
Tough and conformable, repositional.
Waterproof and solvent resistant. Great for clean room paint operations.
Size: 1/2" X 36 yards.
Color: Translucent blue.

For making sharp, fine lines.
Appropriate for composite or fiberglass fabrication.
Preferred for medium to high temperature applications.
3/4" x 108'.
Color: Blue.

Polyethylene-coated cloth tape. Ideal for general purpose applications. Used for weatherproofing, maintenance, bundling. Color: Silver. Size: 2" X 60 yards. Weight: 1.41 lbs.

Double-thick, tough and wide duct tape.
Reinforced backing, with a tight weave.
Rugged, weather-resistant.
Withstands moisture, UV rays and temperature changes.
Adhesive sticks well to smooth, rough or uneven surfaces.
Width: 2.87.
Color: Black.
Roll is 25 yards.

Silicone tape for marine and outdoor repairs. Stretches 3 times its original size. Chemically bonds to itself in 24 hours. Creates an air and watertight bond. Color: Blue. 1" wide. 10 feet long.

Silicone tape for marine and outdoor repairs. Stretches 3 times its original size. Chemically bonds to itself in 24 hours. Creates an air and watertight bond. Color: Black. 1" wide. 10 feet long.

Double-thick adhesive cloth tape.
Designed to "fill up the gaps" on uneven surfaces.
Features reinforced backing for a tough, all-weather seal.
This tape is extra-strong, but still tears easy.
Color: Black.
Size: 1" X 30 feet.

Designed specifically for the marine composites industry.
Tear, moisture, and solvent resistant.
UV resistant up to 72 hours.
Clean removal provides crisp paint lines.
Size: 1".
Color: Orange.

Economic fiberglass reinforced tape Ideal for applications requiring holding power. Used in packing, securing, and isolating. Color: Clear. Size: 1" X 60 yards. Weight: .44 lbs.

Designed specifically for the marine composites industry.
Tear, moisture, and solvent resistant.
UV resistant up to 72 hours.
Clean removal provides crisp paint lines.
Size: 2".
Color: Orange.

Pre-folded high density polyethylene masking film.
Designed for the marine and composites industry.
Thick, durable 12 micron film.
Size: 72" x 30 yards.

Pre-folded high density polyethylene masking film.
Designed for the marine and composites industry.
Thick, durable 12 micron film.
Size: 99" x 30 yards.

Pre-folded high density polyethylene masking film.
Designed for the marine and composites industry.
Thick, durable 12 micron film.
Size: 24" x 60 yards.

Pre-folded high density polyethylene masking film.
Designed for the marine and composites industry.
Thick, durable 12 micron film.
Size: 48" x 60 yards.

"The Ultimate Surface Protector".
Covers surfaces during manufacturing and repair jobs.
Slip-resistant, fire-retardant, and waterproof.
Thickness: 10 mil.
Dimensions: 36" wide, on 100 foot rolls.

NOTE: Due to the size of this product, shipping UPS or USPS may be cost prohibitive.
Please contact Seattle Marine at 1-800-426-2783 for shipping options.

Weatherproof, airtight, crystal clear tape.
Fixes, patches, seals, holds and protects.
Water, UV and temperature resistant.
Color: Non-yellowing clear.
Width: 1.88".
Length: 27 feet.

Silicone tape for marine and outdoor repairs. Stretches 3 times its original size. Chemically bonds to itself in 24 hours. Creates an air and watertight bond. Color: Red. 1" wide. 10 feet long.

For general purpose masking.
Protects surfaces from drips, roller mist, and overspray.
Works well with a paper taper masking machine.
Ideal for use with water based coatings.
Color: Brown.
Dimensions: 12" X 60'.

For general purpose masking.
Protects surfaces from paint drips, roller mist, and overspray.
Works well with a paper taper masking machine.
Ideal for use with water based coatings.
Color: Brown.
Dimensions: 9" X 180'.

Indasa self-adhesive backup pads. For grinding ferrous and non-ferrous metals. Great for polishing welds and rust. Must be used with a low-speed sander. Discs rated at 80 m/s. Diameter: 8". Weight: .6 lb.

Abranet grip-faced sanding pad. 6" diameter. Gray.

Rubber sanding block. Solid rubber with steel grippers. Weight: .84 lb.

Grip-faced multi-hole vacuum block contour kit.
Makes it easier to finish flat or contoured surfaces.
Includes:
- Sanding block
- Four grip faces ( flat, convex, shallow, deep).
May be attached to the MV-912 dust extractor.
Block dimensions: 2.75" X 7.75".

Filter element.
For use with the Mirka DE-1230 dust collector.

Grip-faced interface pad. 3/8" thick. Medium density. Diameter: 5". Five per package.

Milwaukee rubber spiral backing pad Compatible with Milwaukee 13 and 15 Amp sander grinders. Permits air to cool the sanding surface. Great for metal, plastic, or fiberglass. Supports an abrasive sanding disc. Diameter: 7".

Medium density, with 48 vacuum holes. For use with Abranet abrasives. Diameter: 6".

Palm-sized sanding block. For sanding where mechanical sanders can't or shouldn't. Accepts hook and loop abrasives. For 5" sanding discs.

Palm-sized sanding block. For sanding where mechanical sanders can't or shouldn't. For 5" sanding discs.

Fleece dust bag.
For use with the Mirka Dust Collector.
5 per package.

Will not rust or leave rust spots. Medium grade. Three pads per package.

"Butcher Block" wire brush. Six rows of 19 wire strands. Weight: .45 lbs.

Bronze Wool Pads - Fine 3 pads per pack.