Designed for cut gaskets and stamped parts. Slow-drying, non-hardening. Resists common fluids and fuels. Easy disassembly if required. Use where sealing is more important than adhesion. Manufacturer number: 2C. Size: 11 oz.

Designed for cut gaskets and stamped parts. Slow-drying, non-hardening. Resists common fluids and fuels. Easy disassembly if required. Use where sealing is more important than adhesion. Manufacturer number: 2A. Size: 1.5 oz.

Silicone gasket maker. Makes any size or shape gasket in minutes. Replaces cork, felt, rubber, metal, or asbestos. Color: Blue. Size: 11 oz. Weight: .7 lb.

Flexible, semi-paste waterproof sealant.
Slow-oxidizing.
For bedding joints in hull areas.
May be used on wood, fiberglass, or metal.
Apply by hand, pressure gun, or putty knife.
Color: Natural.
Size: 1 quart.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Clear. Size: 2.8 fl. oz. Weight: .22 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Black. Size: 2.8 fl. oz. Weight: .22 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: White. Size: 2.8 fl. oz. Weight: .22 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: White. Size: 10.48 fl. oz. Weight: .83 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Clear. Size: 10.48 fl. oz. Weight: .83 lb.

BoatLIFE silicone rubber sealant. An all-purpose, non-corrosive, high-quality formula. Usable above or below the waterline. Flexible; will not shrink, crack, or dry out. Adheres well to fiberglass, plastic, wood, and metal. Acid-free, will not corrode metallic surfaces. Color: Black. Size: 10.48 fl. oz. Weight: .83 lb.

Green penetrating-grade threadlocker. OEM specified. This low-viscosity formula can wick down assembled threads. Localized heating and tools are needed for disassembly. Size: 6 ml.

Marine GOOP. "The strongest single component adhesive." Bonds to metal, canvas, wood, vinyl, rope and more. UV resistant, can be painted over. Seals with a tight, flexible, waterproof hold. Size: 10 ounces. Weight: .63 lb.

BoatLIFE Life Calk sealant. Non-shrinking, flexible, sandable compound. A low-viscosity, free-flowing polysulfide solution. Designed for use on fine cracks and seams. Offers excellent resistance to petroleum derivatives. Ideal for hull hardware, fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal. Color: White. Size: 1 oz tube.

Red gel high-strength threadlocker. Designed for pin-point application. No mess, no globs. Heavy-duty strength may be used on studs and press fits. Locks against vibration loosening. Size: 36 ml.

A high-performance patching compound.
Formulated to stop running water.
For cracks, holes and imperfections in concrete surfaces.
It creates a watertight seal in about 3-5 minutes.
Works both above and below ground level.
Interior/exterior use.
Color: Gray.
Size: 10 lbs.

A high-performance patching compound.
Stops and seals leaks in concrete and masonry.
Creates a watertight seal in 3 - 5 minutes, "even while water is flowing".
Also works great as a fast-setting anchoring cement.
5 pound package.

Activator for anaerobics. Increases strength of threadlocker adhesive. Speeds curing as much as 50%, Useful in cold weather as a general-purpose solvent. For cleaning surfaces and preparing parts, nuts, and more. Size: 4.5 oz.

Used for sealing wooden deck seams on ships. Traditionally used with oakum. Should be heated to 350 degrees F. before using. Size: 5 gal. Weight: 44 lbs.

General-purpose, low-VOC thermosetting adhesive.
Used to bond virtually all porous and non-porous substrates.
Provides a tough, chip-resistant, flexible bond.
Size: 1 gallon.

Fast-drying, metallic copper aerosol sealant. Helps dissipate heat and fill surface irregularities. Resists all types of petrochemicals. Temperature range -50°F to 500°F. Size: 12 oz.

Premium quality, brush grade, neoprene-based contact cement. High strength, works great for many projects. Fast-drying formula dries in 15-20 minutes. Offers high heat and water resistance when dry. Exceeds industry performance requirements. Color: Tan. Size: 16 oz.

Gorilla fast-dry glue. Formulated to cure in 30-60 minutes. Very strong, same strength and Gorilla Glue original. Versatile; for household use and building projects. 100% waterproof and temperature resistant. Size: .25 oz. Weight: .12 lb.

Gorilla fast-dry glue. Formulated to cure in 30-60 minutes. Very strong, same strength and Gorilla Glue original. Versatile; for household use and building projects. 100% waterproof and temperature resistant. Size: 2 oz. Weight: .2 lb.

General-purpose, low-VOC thermosetting adhesive.
Used to bond virtually all porous and non-porous substrates.
Provides a tough, chip-resistant, flexible bond.
Size: 1/2 pint.

A high-performance aerosol contact adhesive. Aerosol spray designed for bonding vinyl. Use where high strength and heat resistance is needed. Size: 19 oz. Weight: 1.5 lbs.

General-purpose epoxy adhesive. Packaged in a syringe for easy mixing. Designed to bond dissimilar materials. Fills gaps and will not shrink. Sets in five minutes. Dries clear. Size: 1 oz.

Locks and seals threaded fittings. Resists leakage, vibration, moisture, engine fluids. Easy assembly/disassembly. Repositionable for up to 4 hours. Use on PSI sending units, fittings, brakes, steering. Size: 6 ml.

Locks and seals threaded fittings. Resists leakage, vibration, moisture, engine fluids. Easy assembly/disassembly. Repositionable for up to 4 hours. Use on PSI sending units, fittings, brakes, steering. Size: 50 ml.

General-purpose, low-VOC thermosetting adhesive.
Used to bond virtually all porous and non-porous substrates.
Provides a tough, chip-resistant, flexible bond.
Size: 1 pint.

Seal-All. A gas and oil-resistant contact adhesive and sealant. The "repair-kit-in-a-tube". Used for repairing automotive leaks and cracks. Great for garage and engine room repairs. Size: 2 oz. Weight: .08 lb.

Super-strong, super-fast adhesive. Provides a long-lasting bond. Works on most surfaces. Size: 2 grams.