Red Line 5" solid grip discs. Recommended for sanding and finishing of fillers and wood. Coated with anti-clogging lubricant. Aluminum oxide grit, 120 C. C weight paper. 100 discs per box.

Fill voids, pontoons, floating dock blocks Increases buoyancy. Make your own buoy markers. Mix and pour foam to fill cavities 2-lb. density foam increases insulation, flotation and fills gaps Sets in less than 10 minutes. Ready for use in hours. Weight: 5.67 lbs

Red Line 5" solid grip discs. Recommended for sanding and finishing of fillers and wood. Coated with anti-clogging lubricant. Aluminum oxide grit, 100 C. C weight paper. 100 discs per box

High-gloss multi-purpose siloxane coating.
Two components combine into a unique epoxy.
Provides great weather and chemical resistance.
Resists moisture, humidity, corrosion, and acid.
High solids, low VOC.
Color: Haze Gray.
Size: 1 gal.

Non-skid textured vinyl safety tape. Helps to reduce the risk of slipping on wet surfaces. May be applied to floors, ramps, decks, ladders, and more. For indoor and outdoor use. Color: White. Size: 2" X 60'.

Single-component varnish alternative. Based on phenolic-modified alkyd resins and tung oil. Dries to a clear amber finish. Specially formulated for use with oily woods, like teak. For long-lasting protection of all marine woods. Appropriate for interior and exterior woods. Superior flow, gloss and durability. Size: 1 liter.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. For use upon the interior of potable water tanks. NSF certified for use with drinking water. Meets FDA requirement 21 CFR 175.300 for direct food contact Color: Ivory white. Size: 5 gal. Weight: 117.5 lbs.

Makes easy, permanent color-matched repairs. For use with gelcoat and fiberglass hulls and decks. Simple to use: fills in cracks, scratches, and chips. Try it in bathtubs, shower stalls, and hot tubs. Blends with resin colorants for color matching. Size: 1/2 oz.

Repairs fiberglass scratches. For boats, bathtubs, shower stalls, hot tubs and more. A permanent repair for cracks, scratches, chips. Single-part formula does not need a catalyst. Color: White. Size: 1/2 oz.

White Line 6" solid grip discs. Recommended for sanding and finishing of fillers and wood. Aluminum oxide grit, P 120 D. D weight paper. 50 discs per box.

Highest quality ISO NPG marine finish gel coat to repair or replace old gel coat Cures to a permanent high-gloss, hard finish and does not require mold release to attain a fully-cured surface Non-run, non-sag formula, flexible polyester resins, resilient and tough Tint with Evercoat coloring agents to desired color Reduce with acetone for sprayers Weight: 2.67 lbs

The quality ISO NPG marine laminating gel coat to permanently repair or replace original, high-glass finish The product cures to a tacky finish for re-coating Evercoat Mold Release (# 105685) must be used to attain a fully cured surface Use to fill gouges, chips, scrapes and deep scratches in the fiberglass gel coat Gel Kote is a non-run, non-sag formulation of flexible polyester resins to produce resiliency and toughness Evercoat Coloring Agents may be used to tint the material to desired color. Reduce with Evercoat Acetone (10%) to thin for sprayer applications. Weight: 2.67 lbs

Single-component yacht coating.
Based on modified alkyd resins.
Ultra high gloss.
Finishing coat for wood, steel, aluminum, fiberglass.
For interiors or exteriors above the waterline.
Superior flow, gloss, and durability.
Excellent flexibility and water resistance in all weather conditions.
Fresh and salt water resistant.
Vivid color brilliance: "Ultra White".
Size: 2 liter.

95% zinc galvanized coating. For long-term protection of ferrous metals indoors or out. Electrochemically protects bare metals. Withstands water temperature up to 212° and dry temperatures up to 750°. Won't yellow, chalk, crack, or peel. Size: 16 oz.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: ANSI 70 Light Gray. Size: 5 gal.

Unique vinylester formula designed for marine filling and fairing uses above and below waterline.
Cures tack-free in 30 minutes.
Made with 3M Scotchlite glass bubbles for sanding ease.
Size: 1 quart.

1/4" nap polyester blend, phenolic core.
Size: 6-1/2".
Two rollers per pack.

Rubber sanding block. Solid rubber with steel grippers. Weight: .84 lb.

Multifunctional aliphatic polyurethane marine coating. 2 parts, ideal for use on prepared steel surfaces. Low VOC, high gloss, self-priming, tough and flexible. Gives good chemical and stain resistance. Used on marine superstructures, boat decks, and more. Color: "Medium Green." Size: 1 gal.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Provides great corrosion protection. Typically used on steel decks, hulls, and pipes. Color: Haze gray. Size: 5 gal. Weight: 65.63 lbs.

Gorilla super glue. A quick-drying, super-strong formula. Designed for quick fixes and repairs. Works on practically any surface. Twin pack of two 3 gram squeeze pack. Weight: .1 lb.

Amercoat 229T is used as an above-water finish. Durable, tough epoxy, a colorful and glossy top coat. Resists soil and grime pickup; cleans easily. Use wherever corrosion resistance is needed. Color: Champion Blue. Size: 1 gal.

Designed for use with all paints and stains.
Lint-free, 3/16" nap.
Rollers are 4" long.
Two rollers per package.

Badger-style pure China bristles. Stainless steel ferrule. Extra-fine, hand-formed chisel tip. Black-lacquered handwood peg handle. Pre-drilled lanyard hole. Size: 1-1/2". Thickness: 7/16".

Rhynostick White Line self-adhesive 6" solid discs. Recommended for general purpose sanding. Lubricated with anti-clogging solution. Aluminum oxide grit, P 600 C. C weight paper. 100 discs per box.

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Yamaha dark blue metallic (1994 - 1997).

Total engine coverage using quick drying engine paint. Heat and solvent resistant acrylic lacquer. Gives the extended staying power boat engines need. Color matched to engines original color. For outboard/inboard engines, stern drive, and lower units. 12 oz. aerosol can. Color: Honda Oyster silver metallic.

A long-lasting and strong anti-fouling paint.
Dries to a durable hard protective coating that stands up to the toughest fouling conditions.
Trinidad PRO's high copper load (65%) creates an antifoulant with strong resistance to barnacles and other organisms.
Pettit's "Fast Dry" technology allows for painting and launching on the same day, depending on conditions.

Color: Black.

Grip-faced multi-hole vacuum block contour kit.
Makes it easier to finish flat or contoured surfaces.
Includes:
- Sanding block
- Four grip faces ( flat, convex, shallow, deep).
May be attached to the MV-912 dust extractor.
Block dimensions: 2.75" X 7.75".

An epoxy repair compound.
Creates a waterproof bond with most surfaces.
Great for filling voids or cracks.
For use above or below the waterline.
Will not sag, run or shrink.
Convenient 1:1 mixing ratio.

A durable, corrosion-resistant paint.
Perfect for hiding flaws, imperfections and scratches on metal.
Designed to be applied directly on rusted or pitted surfaces.
May be used both indoor and outdoor.
Color: Black gloss.
For best results, apply two coats.
Size: 1 quart.

Filter element.
For use with the Mirka DE-1230 dust collector.

A two-part water-based epoxy primer / sealer.

May be used on concrete, masonry, fiberglass, wood and previously painted substrates.
This primer is recommended for your projects with Tuff Coat for proper adhesion.
Simple 1:1 mix.

1 quart kit.

Amerlock 2 fast-drying surface tolerant epoxy. Adheres to tight rust and prepared damp surfaces. Catalyst helps cure and set epoxy resin. Size: 1 gal.

White Line 5" 9-hole grip discs. Recommended for sanding and finishing of fillers and wood. Lubricated with anti-clogging solution. Aluminum oxide grit, P 80 D. D weight paper. 50 discs per box.

Single-component alkyd gloss topcoat.
Designed to protect and enhance marine exteriors.
Great weathering properties, easy to apply, dries quickly.
Not meant to resist severe chemical or immersion conditions.
Color: White.
Size: 5 gal.