Aluminum construction.
#12 3/4" NPT ports.
#16 1-5/16" cartridge port.
For use with:
- SPESJSA00 cartridge
- SPESJS2C00 cartridge
- SPE30534 12 volt coil
- SPE300AA96A 24 volt coil.
C-16-2 #16 Cavity.

Cylinder spool.
D05 valve pattern.
Closed center.
Rated for 3000 psi.
18.5 GPM MAX.
12 volt.

12 volt solenoid coils. 50 GPM rated flow. 1" #20 SAE O-ring port. Aluminum body.

Fully-adjustable, pressure-compensated. Equipped with reverse flow check. Rated for 12 GPM.

Aluminum construction. 
1/2" NPT ports. 
#10 SAE ORB cartridge port. 
For use with: 
- SPECP5001B000 
- SPEDES2C00. 

Flexmount parallel manifold. 
#12SAE Boss o-ring ports. 
A-D05H-SP-S-12S. 

Divides fluid from pump in two outputs with a 50/50 ratio.
Cast iron body, with Buna N O-ring seals.
May be mounted in any orientation.
Reverse flow restricted.
Rated for 16 GPM.

Fits SS-G03 solenoid directional control valve.
12V.
For use with part numbers: SPESSG03C5RD1, SPESSG03C6RD1, SPESSG03C6001.

Open center. Hi/low speed option. Aluminum body. Interfaces with autopilot systems. Adjustable 1000 PSI relief valve. 24 volt

Motor spool.
D05 valve pattern.
Closed center.
Rated for 3000 psi.
18.5 GPM MAX.
12 volt.

Motor spool.
D05 valve pattern.
Closed center.
Rated for 3000 psi.
18.5 GPM MAX.
24 volt.

#10 SAE ORB cartridge. 
12 GPM. 
Normally closed. 
2 way. 
For use with: 
- SPE30534 12VDC coil 
- SPE300AA96A 24VDC coil. 

D03 valve pattern.
2 station.
Rated ­flow 14GPM @ 15FPS.
Ports: P & T #10.
Ports: A & B #8.
Gauge port #6.

12 volt solenoid coils. 12 GPM rated flow. 5/8 #10 SAE O-ring port. Aluminum body.

Steel solenoid body.
Maximum pressure: 5000 PSI.
C-10-2 #10 cavity.
SAE #8 ORB ports.
To be used in conjunction with SPECP5001B000 or SPEDES2C00.

300A series solenoid coil.
24 volt.
.96 amp, 23 watts.
Suitable for use with J series 10, 12, 16 and 20 size solenoid valves.

14 GPM per section.
Load sense / pressure compensated.
12 volt solenoid coils with leads.
Aluminum body.
#16 in, #12 work, #4 sensor, #6 drain.

Normally open. 35 GPM. DIN 43650 / 18036 block connector. 12 volt DIN coil. 3000 PSI maximum. Does include body. SV3 16 0 12T 12DG SOL NO.

12 GPM max flow cartridge. 12 volt solenoid coil. Aluminum body with #8 SAE O-ring ports.

Transforms a T port to HPCO configuration.
Manufacturer's part number: 413010207.

3.5" X 5". 
Momentary, spring return to center. 
Movement: ON / OFF / ON.

For use with a Hydrocontrol D4 sectional valve.
Four bolts (with nuts and washers) per kit.

02-171071.
6 GPM maximum flow cartridge.
12 volt coil with flying lead wires.
Aluminum body with #6 ORB ports.
Part number: 565537.

Hydrocontrol D4 sectional valve.
A compact, versatile, flexible marinized sectional valve.
Up to 12 sections.
Stainless steel spools.
Max flow rate of 22 GPM.
Max pressure of 5000 psi.
Optional power beyond.
Available in multiple spool types.
Available in spring-to-center and rotary manual actuation.
#10 SAE ORB.
Spring to center.
Cylinder spool.

Hydrocontrol D4 sectional valve.
A compact, versatile, flexible marinized sectional valve.
Up to 12 sections.
Stainless steel spools.
Max flow rate of 22 GPM.
Max pressure of 5000 psi.
Optional power beyond.
Available in multiple spool types.
Available in spring-to-center and rotary manual actuation.
#10 SAE ORB.
Spring to center.
Motor spool.

Includes seals.

Open center. Operates port and starboard buckets. Aluminum body. 12 volt coils.

Open center. Aluminum body. Interfaces with autopilot systems or jog lever. 12 volt coils. Adjustable 1000 PSI relief valve.

A versatile sectional valve. 
Available in many configurations. 
Fully marinized, up to 12 sections. 
Stainless steel spools. 
Maximum flow rate: 40 GPM. 
Maximum pressure: 5000 PSI. 
Optional power beyond. 
Available in multiple spool types. 
#12 SAE ORB. 
Rotary actuated. 
Motor spool.

Aluminum construction. 
#6 SAE ORB ports. 
#8 SAE ORB cartridge port. 
For use with: 
- SPE02164223.

Intended for use with an OEM Controls MS2 joystick.

Load sense. Closed center. Operates port and starboard buckets. Aluminum body. 12 volt coils.

3/4".

Normally open solenoid cartridge. 40 GPM. 2 way. 3/4".

A versatile sectional valve.
Available in many configurations.
Fully marinized, up to 12 sections.
Stainless steel spools.
Maximum flow rate: 40 GPM.
Maximum pressure: 5000 PSI.
Optional power beyond.
Available in multiple spool types.
Available in spring-to-center and rotary manual actuation.
#16 SAE ORB.