Open center / cylinder spool. 12 GPM rated flow. 3625 PSI maximum work pressure. P, A, and B ports #8 SAE O-ring. T port #10 SAE O-ring. Spring to neutral. Nickel plated spool.

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure P, A and B ports #10 SAE O-ring. T port #12 SAE O-ring. Spring to neutral. Nickel-plated spool.

Walvoil EX38 full flow sharing sectional valve. 
- Pressure-compensated flow control work sections 
- Sectional valve (1-10 sections) 
- Load sensing 
- Full flow pressure relief 
For use with mechanical, hydraulic, 
pneumatic and proportional electro-hydraulic controls. 
Manually actuated, spring to center spool. 
22 GPM. 
#10 SAE ORB work ports.

Long handle. 
Length: 210mm long. 

1/2" NPT ports. 20 GPM maximum flow. Cast iron body. Hard chrome-plated spool.

3/4" NPT ports. 40 GPM maximum flow. Cast iron body. Hard chrome-plated spool.

Monoblock valve.
Fitted with a pressure relief valve and load check valve.
Simple, compact, heavy-duty.
Available in a wide variety of port configurations, spool types, and spool control kits.
18 GPM.
Max operating pressure: 4600 PSI.
Inlet/outlet ports: #10 SAE ORB.
Work ports: #8 SAE ORB.
Outlet port back pressure rating: 360 PSI.
Banks: 1.
Spring to center.
Cylinder spool.

For Salami pump.

Walvoil EX38 hydraulic control valve bolt kit.
Includes three bolts.

Single pole.
Normally open.
Has standard finger-safe contacts.
IP20 protection rating.

Open center / cylinder spool.
18 GPM rated flow 3000 PSI maximum work pressure.
3/4" NPTF inlet/outlet ports.
1/2" NPTF work ports.
Spring to neutral.
Cast iron body with a stainless steel spool.

Short handle. 
Length: 135mm long.

Fits Walvoil DPX100 or SDS100 work sections.

Post-pressure compensated sectional valve.
Designed specifically for mobile applications.
Provides controllability, efficiency and flexibility
for applications requiring up to 160 liters per minute.
Adds the benefit of Flow Sharing technology.
DPX valves are highly configurable
with multiple inlet and outlet ports on each cover.
Manually actuated, spring to center spool.
15 GPM.
#10 SAE ORB Work ports.

For use with a Hydrocontrol D16 sectional valve.
Four bolts (with nuts and washers) per kit.

For use with a Hydrocontrol D16 sectional valve.
Four bolts (with nuts and washers) per kit.

For use with a Hydrocontrol D16 sectional valve.
Four bolts (with nuts and washers) per kit.

Open center / cylinder spool. 18 GPM rated flow. 3000 PSI. 3/4" NPTF inlet / outlet ports. 1/2" NPTF work ports. Cast iron body, stainless steel spool.

Replacement handle for a hydraulic valve. 
For use with Salami VDM08 valve. 

Monoblock valve.
Fitted with a pressure relief valve and load check valve.
Simple, compact, heavy-duty.
Available in a wide variety of port configurations, spool types, and spool control kits.
18 GPM.
Max operating pressure: 4600 PSI.
Inlet/outlet ports: #10 SAE ORB.
Work ports: #8 SAE ORB.
Outlet port back pressure rating: 360 PSI.
Banks: 1.
Friction hold.
Cylinder spool.

Monoblock valve.
Fitted with a pressure relief valve and load check valve.
Simple, compact, heavy-duty.
Available in a wide variety of port configurations, spool types, and spool control kits.
18 GPM.
Max operating pressure: 4600 PSI.
Inlet/outlet ports: #10 SAE ORB.
Work ports: #8 SAE ORB.
Outlet port back pressure rating: 360 PSI.
Banks: 1.
Rotary.
Cylinder spool.

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A and B ports #10 SAE O-ring. T port #12 SAE O-ring. Spring to neutral. Nickel-plated spool.

- 39 GPM maximum inlet flow
- 5000 PSI maximum inlet pressure
- 145 PSI maximum back pressure outlet port
- #12 SAE ORB pressure port
- #12 SAE ORB return port
- #6 SAE ORB load sense port.

Walvoil EX38 end cover - standard end plate.

For DPX100 valve section.