Bolt kit for 5-section Walvoil valve.

For use with a Hydrocontrol D16 sectional valve.
Four bolts (with nuts and washers) per kit.

For use with a Hydrocontrol D16 sectional valve.
Four bolts (with nuts and washers) per kit.

Open center. 12 GPM rated flow. 5000 PSI maximum. Spring to center with fourth position hold. Fourth position allows for anchor winch free wheel.

Standard end plate for SL3 valve

26.4 Max GPM.
Ports:
Pressure: #12 SAE ORB
Return: #12 SAE ORB
Load Sense: #4 SAE ORB
Pressure relief to 5000 PSI.

For use with a Hydrocontrol D4 sectional valve.
Four bolts (with nuts and washers) per kit.

Single spool gurdy valve. 4-way, 3 position control valve. Mounts directly on manifold (non-threaded) ported motors. Usable with Charlynn Gurdy motors 101-1019, 1021, 1022. Complete with stainless steel mounting hardware and O-rings. Weight: 6.81 lbs.

Used to assemble complete 3-section Hawe SL3 series valve.

Used to assemble complete 2-section Hawe SL3 series valve.

Used to assemble a complete 1-section Hawe SL3 series valve.

Lever handle with a black knob. Used with D4 work sections.

Walvoil EX38 replacement boot.

Two position, spring return up and down. 
Standard lever. 
Plastic bezel. 
Mounting hole size: 22 mm. 
Movement: ON / OFF / ON. 

Walvoil EX38 full flow sharing sectional valve.
- Pressure-compensated flow control work sections
- Sectional valve (1-10 sections)
- Load sensing
- Full flow pressure relief
For use with mechanical, hydraulic, pneumatic and proportional electro-hydraulic controls
Electrically actuated, 12 V DC
16 GPM
#10 SAE ORB Work ports

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A and B ports #10 SAE-O-ring. T port #12 SAE O-ring. Friction hold. Nickel plated spool.

Post-pressure compensated sectional valve. 
Designed specifically for mobile applications. 
Provides controllability, efficiency and flexibility 
for applications requiring up to 160 liters per minute. 
Adds the benefit of Flow Sharing technology. 
DPX valves are highly configurable 
with multiple inlet and outlet ports on each cover. 
Manually actuated, friction spool. 
15 GPM. 
#10 SAE ORB Work ports. 

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A and B ports #10 SAE O-ring. T port #12 SAE O-ring. Spring to neutral. Nickel-plated spool.

Open center / cylinder spool.
20 GPM rated flow.
3625 PSI maximum work pressure.
P, A and B ports #10 SAE O-ring.
T port #12 SAE O-ring.
1 spring to neutral, 1 friction.
Nickel-plated spool.

Post-pressure compensated sectional valve inlet cover. 
Designed specifically for mobile applications. 
Provides controllability, efficiency and flexibility 
for applications requiring up to 160 liters per minute. 
Adds the benefit of Flow Sharing technology. 
DPX valves are highly configurable 
with multiple inlet and outlet ports on each cover. 
Maximum inlet flow: 32 GPM. 
Maximum inlet pressure: 4350 PSI. 
Maximum outlet port back pressure: 145 PSI. 
Pressure ports: #12 SAE ORB. 
Return ports: #12 SAE ORB. 
Load sense port: #4 SAE ORB. 

Walvoil valve handle.
Length: 8".

Post-pressure compensated sectional valve outlet cover. 
Designed specifically for mobile applications. 
Provides controllability, efficiency and flexibility 
for applications requiring up to 160 liters per minute. 
Adds the benefit of Flow Sharing technology. 
DPX valves are highly configurable 
with multiple inlet and outlet ports on each cover. 
Maximum inlet flow: 32 GPM. 
Maximum inlet pressure: 4350 PSI. 
Maximum outlet port back pressure: 145 PSI. 
Pressure ports: #12 SAE ORB. 
Return ports: #12 SAE ORB. 
Load sense port: #4 SAE ORB. 

Open center / cylinder spool. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A and B ports #10 SAE O-ring. T port #12 SAE O-ring. Spring to neutral. Nickel-plated spool.

Bolt kit for 3-section Walvoil valve.

Bolt kit for 4-section Walvoil valve.

For use with a single section Walvoil valve.

Bolt kit for 2-section Walvoil valve.

Open center. 20 GPM rated flow. 3625 PSI maximum work pressure. P, A, and B port #10 SAE O-ring ports. T port #12 SAE O-ring ports. Spring to center with fourth position float. Fourth position allows for anchor winch free wheel. Nickel plated spool.

Fits Walvoil DPX100 or SDS100 work sections.

Walvoil EX38 hydraulic control valve bolt kit.
Includes three bolts.

Single pole.
Normally open.
Has standard finger-safe contacts.
IP20 protection rating.

Open center / cylinder spool.
18 GPM rated flow 3000 PSI maximum work pressure.
3/4" NPTF inlet/outlet ports.
1/2" NPTF work ports.
Spring to neutral.
Cast iron body with a stainless steel spool.

Short handle. 
Length: 135mm long.

Fits Walvoil DPX100 or SDS100 work sections.

Post-pressure compensated sectional valve.
Designed specifically for mobile applications.
Provides controllability, efficiency and flexibility
for applications requiring up to 160 liters per minute.
Adds the benefit of Flow Sharing technology.
DPX valves are highly configurable
with multiple inlet and outlet ports on each cover.
Manually actuated, spring to center spool.
15 GPM.
#10 SAE ORB Work ports.

For use with a Hydrocontrol D16 sectional valve.
Four bolts (with nuts and washers) per kit.