1-1/2" NPT ports.
No bypass.
Up to 32 GPM suction line.

Allows flow in one direction. Requires 65 PSI to initiate flow. Size: 3/8".

For fuel and lubricant. ID: 3/8". OD: 1/2". Sold by the foot.

Connects the two ends of a roller chain. Stainless steel. Long link. Size: #60.

Normally open solenoid cartridge. 40 GPM. 2 way. 3/4".

Allows flow in one direction.
Requires 30 PSI to initiate flow.
Size: 3/4".

A versatile sectional valve.
Available in many configurations.
Fully marinized, up to 12 sections.
Stainless steel spools.
Maximum flow rate: 40 GPM.
Maximum pressure: 5000 PSI.
Optional power beyond.
Available in multiple spool types.
Available in spring-to-center and rotary manual actuation.
#16 SAE ORB.

Replacement valve set for BHW2015000. 
Rubber washers are for use with water. 
Viton washers are needed for use with oils: BHW2000201.

A versatile sectional valve. 
Available in many configurations. 
Fully marinized, up to 12 sections. 
Stainless steel spools. 
Maximum flow rate: 40 GPM. 
Maximum pressure: 5000 PSI. 
Optional power beyond. 
Available in multiple spool types. 
Available in spring-to-center and rotary manual actuation. 
#12 SAE ORB. 

Elastomeric jaw-type flexible coupling hub. The industry standard. Easy to assemble / disassemble. Contain an inserted rubber spider cushion. Will continue to work even if cushion fails. Model L100. Shaft size: 3/4".

Hydraulic spin-on filter.
10-micron.
Thread: 1-1/2" - 16.
O.D. 5-1/16".
Length: 10-3/4".
I. Gasket: G286-C.

Proportional electronic joystick. 
Available in 12/24 VDC. 
Spring-to-center or Friction-hold actuation. 
Adjustable Low and High settings affecting initial and max speed.

Proportional electronic joystick. 
Available in 12/24 VDC. 
Spring-to-center or Friction-hold actuation. 
Adjustable Low and High settings 
affecting initial and max speed. 

Elastomeric jaw-type flexible coupling hub. The industry standard. Easy to assemble / disassemble. Contain an inserted rubber spider cushion. Will continue to work even if cushion fails. Model L100. Shaft size: 7/8".

Filters hydraulic oils, glycols, and other fluids.
Temperature range: -20° F TO 225° F.
10 micron.
Uses one 8RZ filter element (SPE8RZ10).

Buna N spider insert cushion for Lovejoy coupling hub. Insert material is nitrile butadiene rubber. Oil resistant and highly resiliant for a long life. Coupling size: L150.

Seal kit for Vickers V20 pumps.

Includes:
- Filler cap with chain
- Mesh strainer
- 2 gaskets.

Elastomeric jaw-type flexible coupling hub. The industry standard. Easy to assemble / disassemble. Contain an inserted rubber spider cushion. Will continue to work even if cushion fails. Model L099. Shaft size: 5/8".

Elastomeric jaw-type flexible coupling hub. The industry standard. Easy to assemble / disassemble. Contain an inserted rubber spider cushion. Will continue to work even if cushion fails. Model L095. Shaft size: 1".

Bolts, washers, nuts and other hardware. For use with a V20 pump system.

Hydraulic spin-on filter.
(NAPA 1860).
10 micron.
Thread: 1-1/2" - 16.
O.D. 5-1/32".
Length: 10-3/4".
F. Gasket: G286-C
O. Gasket: G269-B.

3.5" X 5". 
Momentary, spring return to center. 
Movement: ON / OFF / ON.

For use with a Hydrocontrol D4 sectional valve.
Four bolts (with nuts and washers) per kit.

In-line type. Shuttle valves accept flow from two different sources and divert the highest pressure to a single outlet port. Commonly used in load sense hydraulic systems.

Six bolts. Six washers.

Hydraulic spin-on filter.
10-micron.
Thread: 1-1/2".
O.D. 3-25/32".
Length: 5-5/16".
I. Gasket: G401.

02-171071.
6 GPM maximum flow cartridge.
12 volt coil with flying lead wires.
Aluminum body with #6 ORB ports.
Part number: 565537.

Hydrocontrol D4 sectional valve.
A compact, versatile, flexible marinized sectional valve.
Up to 12 sections.
Stainless steel spools.
Max flow rate of 22 GPM.
Max pressure of 5000 psi.
Optional power beyond.
Available in multiple spool types.
Available in spring-to-center and rotary manual actuation.
#10 SAE ORB.
Spring to center.
Cylinder spool.

Hydrocontrol D4 sectional valve.
A compact, versatile, flexible marinized sectional valve.
Up to 12 sections.
Stainless steel spools.
Max flow rate of 22 GPM.
Max pressure of 5000 psi.
Optional power beyond.
Available in multiple spool types.
Available in spring-to-center and rotary manual actuation.
#10 SAE ORB.
Spring to center.
Motor spool.

Stainless steel.
Length: 10 feet.
192 links.
Part number: GS50RIV (SS).
Meets ASME/ANSI B29.1 standards.
Stocked in 10' lengths; available by the foot.

2-3/4" pilot register. #1310 series U-joint. Spicer adapter for driveline.

For mounting electric clutch to VTM series hydraulic pump.

 #20 Code 62 anchor flange.

Use for all types of liquid level verification 1/2" NPT male pipe connections. Aluminum hand wheels; EPDM gauge glass gaskets standard. Automatic ball checks help prevent the loss of fluids should the glass be broken. Rough brass, equipped with two copper guard rods Standard 1/4" needle drain valve in lower arm. Pipe size: 1/2" Glass O.D.: 5/8" Length: 12"