Balanced cylinder with engineering features and a simple design make this a very durable cylinder.
Brass tube and piston, end caps and bearings are silicon bronze.
Piston rod is stainless steel and hard chromed.
Nitrile seals provide smooth piston movement.
Bore: 1-1/2".

Heavy duty balanced inboard brass cylinder with chrome
plated stainless steel rods & ball joint.
Stainless steel and bronze mounting hardware.
2-axis articulation.
Bore: 2"
Shaft diameter: 1"
Stroke: 11"
Volume: 26.0 cu. in.
Seal kit: HS5185
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid. 

Heavy duty balanced inboard brass cylinder with bleed
fittings; chrome plated stainless steel rods & ball joint.
Stainless steel and bronze mounting hardware.
2-axis articulation.
Bore: 2"
Shaft diameter: .75"
Stroke: 7"
Volume: 18.9 cu. in.
Seal kit: HS5184
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

SeaStar sterndrive steering cylinder.
For non-power assist steering configurations.
Bore: 1.35"
Shaft diameter: .625"
Stroke: 7"
Volume: 8.3 cu. in.
3/8” compression fittings.
Seal kit: HS5155

Balanced cylinder with engineering features and a simple design make this a very durable cylinder.
Brass tube and piston, end caps and bearings are silicon bronze
Piston rod is stainless steel and hard chromed
Nitrile seals provide smooth piston movement
Bore: 2".

SeaStar sterndrive steering cylinder.
For non-power assist steering configurations.
Bore: 1.50"
Shaft diameter: .625”
Stroke: 7”
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5156

SeaStar sterndrive steering cylinder.
For power assist steering configurations.
Bore: 1.25"
Shaft diameter: .50”
Stroke: 8”
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5154

Inboard steering cylinder for single and dual rudder vessels.
Anodized aluminum construction.
Adjustable o-ring sealed ports.
Two axis articulation.  
Supplied with bleeder fittings.  
Bore: 1.25"
Shaft diameter: .63"
Stroke: 7"
Volume: 7.2 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5154
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

Inboard steering cylinder for single and dual rudder vessels.   
Anodized aluminum construction.
Adjustable o-ring sealed ports.
Two axis articulation.  
Supplied with bleeder fittings.  
Bore: 1.35"
Shaft diameter: .63"
Stroke: 7"
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5155
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.

Fits most power and non-power assist sterndrives. May be used with single and multiple drive systems. Aluminum construction, stainless steel shaft. 7" travel.

Balanced cylinder with engineering features and a simple design make this a very durable cylinder.
Brass tube and piston, end caps and bearings are silicon bronze.
Piston rod is stainless steel and hard chromed.
Nitrile seals provide smooth piston movement.
Bore: 2".

Single and multiple outboard engine capability.
Unbalanced cylinder with 4.8/5.7 turns lock to lock
(1.7 helm).
Typical applications include center console fishboats
& cruisers.
Side mount, suitable for installation in shallow
splashwells.
Bore: 1.25"
Shaft diameter: .5"
Stroke: 8"
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HP6088  

Front-mount balanced cylinder for outboards.  
Designed for single/twin non-power assisted engines.  
Ultra corrosion-resistant construction.  
Rigid tilt tube mount.  
Pivoted tiller connection.  
Integral bleeding fittings.
Bore: 1.375"
Shaft diameter: .75"
Stroke: 8"
Volume: 8.34 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5157

SeaStar sterndrive steering cylinder.
For non-power assist steering configurations.
Bore: 1.25"
Shaft diameter: .50”
Stroke: 7”
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports. 
Seal kit: HS5154

Power assist sterndrive cylinder.
For use with specific Volvo sterndrives.  
Bore: 1.25"
Shaft diameter: .50"
Stroke: 8"
Volume: 8.3 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5154

Balanced cylinder with engineering features and a simple design make this a very durable cylinder.
Brass tube and piston, end caps and bearings are silicon bronze.
Piston rod is stainless steel and hard chromed.
Nitrile seals provide smooth piston movement.
Bore: 2".

Inboard balanced cylinder.
Replaced Hynautic K-19 cylinder.
Universal mount.
Cylinder equipped with swivel joints at each end.
Shaft diameter: .75"
Stroke: 9"
Volume: 9 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: KS-02

Inboard steering cylinder for single and dual rudder
vessels.   
Anodized aluminum construction.
Adjustable o-ring sealed ports.
Two axis articulation.  
Supplied with bleeder fittings.  
Bore: 1.50"
Shaft diameter: .63"
Stroke: 7"
Volume: 10.2 cu. in.
Fitted with O-Ring Boss (ORB) style hose fitting ports.
Seal kit: HS5156
Please note that SeaStar Capilano systems use Dexron II ATF,
not SeaStar steering fluid.