Spin-on filter. Dimensions: 9-19/32" X 4-21/32"

Secondary fuel filter, spin-on.
Fits: Case consolidated Diesel Cummins engines; Komatsu equipment.

2 micron. For secondary (final) filtration. Includes seals.

Replacement element for the Racor 025-RAC-02 filter assembly.
Includes required seals for replacement.
Filter rating 10 micron.
Racor S-2502.

Water-absorbing fuel storage tank element.
Absorbs up to 3 ounces of water over life span of filter.
Flow rate: 25 GPM pumped, 10 GPM gravity fed.
15 micron.
1-1/8" mounting stud.
Length: 4-7/8".

Spin-on fuel filter / water separator assembly. For gasoline fuel only. Flow rate: 30 GPH. Uses Aquabloc II filter element, 10 micron. Has a see-through bowl with a drain. Dimensions: 6-1/2" tall, 3-1/4" diameter.

Engineered to repel water and remove contaminates. A secondary filter for 900 series turbine assemblies. Filter is 10 microns.

Features: - 2 micron element - See-through bowl - Primber bulb. Not recommended for gas applications. (This model does not have a probe).

Racor gasoline / water seperator unit.
Features a reusable see-through bowl with a self-venting drain.
Size: 10 microns.
Designed specifically for Mercury / MerCruiser outboard applications.

Racor twin manifold turbine fuel filtration
system with three-stage filtration.
Provides maximum protection of diesel engine
components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
Complete with see through bowls.
4-way valve allows for cleaning while operating.
2 micron elements included.
Max. flow rate: 120 GPH.
Port Size: 1/2" ORB.
Replacement element: 2010 series, requires 2.
Dimensions: 11.45"H X 14.5"W X 10.03"D.

Replacement filter element. 30 micron. Fits the Racor 120A, 120R, 122R, and 140R. For diesel or gasoline. M18 X 1.5 center thread port connection.

Replacement filter for SNAPP brackets. Designed for small diesel and gasoline engines. Simple to install and replace. All plastic housing. Quick-connectors for fuel lines.

High-flow fuel water separator assembly. Diesel flow rate of 10 GPM - 18 GPM depending on filter. Features: - Delta pressure gauge - Sight glass to see water collection - Water drain. Does not include a filter element.

Water/fuel separator cartridge. For Racor FBO 10. 10 micron. Dimensions: 9.93" X 6".

Designed for small diesel and gasoline engines. Simple to install and replace. All plastic housing. Quick-connectors for fuel lines. Includes a bracket for mounting.

Outboard complete filter 2 Micron element, see-thru bowl, primer bulb Max flow rate: 60 GPH/340 Iph Center threads: 1-14 Head port size: 3 Clean pressure drop: 30 PSI/207 kPa Element removal underbowl: 1"/25.4 mm Max Pressure: 7 PSI/48 kPa Operating temp: 1"/25.4 mm Height: 9.38" X 4" X 4".

Inboard/Outboard complete filter 2 Micron element, see-thru bowl, primer bulb Max flow rate: 60 GPH/340 Iph Center threads: 1-14 Head port size: 3 Clean pressure drop: 30 PSI/207 kPa Element removal underbowl: 1"/25.4 mm Max Pressure: 7 PSI/48 kPa Operating temp: 1"/25.4 mm Height: 9.38" X 4" X 4".

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 2 microns.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 10 microns.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 30 microns.

Schroeder on-board coalescing diesel fuel filter.
Features an automatic drain design.
Low investment cost due the economical design.
Long service life of the element yields low operating costs.
Seamless installation due to the plug and play.
Easy adaption to the on-board power supply.
Unsurpassed water removal for ULSD.
24 volt DC.
2.6 GPM.
Port size: 3/4" BSP.

Engineered to repel water and remove contaminates.
A primary/secondary filter for 500 series turbine assemblies.
Filter is 10 microns.

Water absorbing filter.
10 microns.
Height: 7".
Diameter: 5".

Diesel filter assembly with drain - 15 GPH 2 micron element, see-thru bowl, primer bulb

Engineered to repel water and remove contaminates.
Used as a secondary filter for 500 series turbine assemblies
Filter is 2 microns.

10 micron. Replaces filter to Unit 660. For gasoline.

Rated for 30 GPH. Gasoline only. 10 micron filter. Port connection 1/4" NPTF.

Rated for 30 GPH. Gasoline only. 10 micron filter. Replaces filter on Racor 320R-RAC-01.

10 Micron (3213) is Replace filter to Unit B32013 Weight: 1.2 lb

Rated for 30 GPH. Gasoline only. 10 micron filter. Replaces filter on Racor B32014.

Racor fuel filter / water separator turbine
with three-stage filtration.
Provides maximum protection of diesel engine
components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
See-through bowl.
2 micron element included.
Max flow rate: 60 GPH.
Port Size: 1/2" ORB.
Replacement element: 2010SM series.
Dimensions: 11-1/2"H X 5.8"W X 4.8"D.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 30 microns.