Spin-on filter. Dimensions: 9-19/32" X 4-21/32"

Secondary fuel filter, spin-on.
Fits: Case consolidated Diesel Cummins engines; Komatsu equipment.

2 micron. For secondary (final) filtration. Includes seals.

Replacement element for the Racor 025-RAC-02 filter assembly.
Includes required seals for replacement.
Filter rating 10 micron.
Racor S-2502.

Engineered to repel water and remove contaminates. A secondary filter for 900 series turbine assemblies. Filter is 10 microns.

Features: - 2 micron element - See-through bowl - Primber bulb. Not recommended for gas applications. (This model does not have a probe).

Racor gasoline / water seperator unit.
Features a reusable see-through bowl with a self-venting drain.
Size: 10 microns.
Designed specifically for Mercury / MerCruiser outboard applications.

Racor twin manifold turbine fuel filtration
system with three-stage filtration.
Provides maximum protection of diesel engine
components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
Complete with see through bowls.
4-way valve allows for cleaning while operating.
2 micron elements included.
Max. flow rate: 120 GPH.
Port Size: 1/2" ORB.
Replacement element: 2010 series, requires 2.
Dimensions: 11.45"H X 14.5"W X 10.03"D.

Water/fuel separator cartridge. For Racor FBO 10. 10 micron. Dimensions: 9.93" X 6".

Designed for small diesel and gasoline engines. Simple to install and replace. All plastic housing. Quick-connectors for fuel lines. Includes a bracket for mounting.

Water-absorbing fuel storage tank element.
Absorbs up to 3 ounces of water over life span of filter.
Flow rate: 25 GPM pumped, 10 GPM gravity fed.
15 micron.
1-1/8" mounting stud.
Length: 4-7/8".

Spin-on fuel filter / water separator assembly. For gasoline fuel only. Flow rate: 30 GPH. Uses Aquabloc II filter element, 10 micron. Has a see-through bowl with a drain. Dimensions: 6-1/2" tall, 3-1/4" diameter.

Replacement filter element. 30 micron. Fits the Racor 120A, 120R, 122R, and 140R. For diesel or gasoline. M18 X 1.5 center thread port connection.

Replacement filter for SNAPP brackets. Designed for small diesel and gasoline engines. Simple to install and replace. All plastic housing. Quick-connectors for fuel lines.

High-flow fuel water separator assembly. Diesel flow rate of 10 GPM - 18 GPM depending on filter. Features: - Delta pressure gauge - Sight glass to see water collection - Water drain. Does not include a filter element.

Outboard complete filter 2 Micron element, see-thru bowl, primer bulb Max flow rate: 60 GPH/340 Iph Center threads: 1-14 Head port size: 3 Clean pressure drop: 30 PSI/207 kPa Element removal underbowl: 1"/25.4 mm Max Pressure: 7 PSI/48 kPa Operating temp: 1"/25.4 mm Height: 9.38" X 4" X 4".

Inboard/Outboard complete filter 2 Micron element, see-thru bowl, primer bulb Max flow rate: 60 GPH/340 Iph Center threads: 1-14 Head port size: 3 Clean pressure drop: 30 PSI/207 kPa Element removal underbowl: 1"/25.4 mm Max Pressure: 7 PSI/48 kPa Operating temp: 1"/25.4 mm Height: 9.38" X 4" X 4".

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 2 microns.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 10 microns.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 30 microns.

Diesel filter assembly with drain - 15 GPH 2 micron element, see-thru bowl, primer bulb

Engineered to repel water and remove contaminates.
Used as a secondary filter for 500 series turbine assemblies
Filter is 2 microns.

10 micron. Replaces filter to Unit 660. For gasoline.

Rated for 30 GPH. Gasoline only. 10 micron filter. Port connection 1/4" NPTF.

Rated for 30 GPH. Gasoline only. 10 micron filter. Replaces filter on Racor 320R-RAC-01.

10 Micron (3213) is Replace filter to Unit B32013 Weight: 1.2 lb

Rated for 30 GPH. Gasoline only. 10 micron filter. Replaces filter on Racor B32014.

Racor fuel filter / water separator turbine
with three-stage filtration.
Provides maximum protection of diesel engine
components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
See-through bowl.
2 micron element included.
Max flow rate: 60 GPH.
Port Size: 1/2" ORB.
Replacement element: 2010SM series.
Dimensions: 11-1/2"H X 5.8"W X 4.8"D.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 30 microns.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 10 microns.

A replacement Turbine series filter element for Racor fuel/water separator units.
Features several improvements over previous models:
- A side-seam, center-bail design, which eliminates the metal "V-clip"
- Increased bail strength, by moving the bails to the top of the filter
- Improved capacity for dirt/soil/scum.
For 1000 series Racor fuel filter assemblies.
Includes a T-handled O-ring and lid seal kit.
Filter is 2 microns.

Includes gasket and O-ring. 2 micron. For secondary/final filtration. Brown.

Rated for 30 GPH. Gasoline only. 10 micron filter. Replaces filter on Racor 320R-RAC-02.