33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 15 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 5 feet.

Replacement 33C 3300 red jacket control cable.
Stainless steel rods, hubs, and end fittings.
10-32 threaded ends, 3" covered core wires.
UV resistant polyethylene outer jacket.
Replaces your Morse 33C control cable.
Size: 17 feet.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 6'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 9'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 30'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 27'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 22'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 17'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 11'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 19'.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 5 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 28 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 26 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 24 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 30 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 11 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 10 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 6 feet.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 20 feet.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 15 feet.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 10 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 28 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction. 150mm minimum bend radius. Black UV-resistant polyethylene cover. Length: 10 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 20 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 17 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 15 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 14 feet.

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 156".

High-density, UV-resistant nonmetallic jacket.
For use with MOR317310 vernier control head.
10-32 threaded stainless steel end.
Vernier cable only.
Length: 20'. 

33LU cable with Tee knob
Easy to install and operate
For remote control of choke, throttle or other applications
Solid stainless core in a non-metallic liner
Cable can be shortened to needed dimensions
Size: 10 feet.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 8'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 7'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 26'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 28'.

40 series OEM direct-replacement control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals.  
1/4-28 threaded ends, 3" travel, clamp connection both ends.
Has a 5" minimum bend radius design.
Length: 24'.