High-density, UV-resistant nonmetallic jacket.
For use with MOR317310 vernier control head.
10-32 threaded stainless steel end.
Vernier cable only.
Length: 14'.

High-density, UV-resistant nonmetallic jacket.
For use with MOR317310 vernier control head.
10-32 threaded stainless steel end.
Vernier cable only.
Length: 6'. 

33C cable features high efficiency armored core technology.
Specially processed polymer liner minimizes friction.
Heavy duty, high density, non-hydroscopic polymer jacket.
End fittings utilize stainless steel and nickel plated brass components.
Durable polymer seals & boots minimizes contamination and moisture from entering cable.
Comparison grades: Pro-X A-7100, SeaStar CCX633, Morse 301947, and Uflex Czero cables.
10-32 threaded ends.

Length: 4.5'.

33LU cable with Tee knob. Easy to install and operate. For remote control of choke, throttle, or other engine appli Solid stainless core in a non-metallic liner. Cable can be shortened to needed dimensions. Size: 30 feet. Weight: 4 lbs.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 25 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 20 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 15 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 5 feet.

Replacement 33C 3300 red jacket control cable.
Stainless steel rods, hubs, and end fittings.
10-32 threaded ends, 3" covered core wires.
UV resistant polyethylene outer jacket.
Replaces your Morse 33C control cable.
Size: 17 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 11 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 9 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 23 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 22 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 28 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 26 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 24 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 30 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 11 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 10 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 6 feet.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 20 feet.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 15 feet.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 10 feet.

Fits pre-1979 OMC®/Johnson®/Evinrude® with BRP/OMC controls.
Stainless steel and brass fittings with stainless
steel core wire for smooth operation and long life.
8" minimum bend radius.
Length: 9 feet.

Fits pre-1979 OMC®/Johnson®/Evinrude® with BRP/OMC controls.
Stainless steel and brass fittings with stainless
steel core wire for smooth operation and long life.
8" minimum bend radius.
Length: 8 feet.

Fits pre-1979 OMC®/Johnson®/Evinrude® with BRP/OMC controls.
Stainless steel and brass fittings with stainless
steel core wire for smooth operation and long life.
8" minimum bend radius.
Length: 7 feet.

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 84".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 96".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 72".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 132".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 168".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 180".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 144".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 216".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 228".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 192".