Seal kit for Capilano HC5318, HC5349,
HC5355, and HC5369 inboard cylinders.

Seal kit for Capilano HC5362, HC5378,
and HC5379 inboard cylinders.

Seal kit for Capilano HC5351, HC5354,
HC5357, and HC5369, inboard cylinders.

Contains replacement snap rings, O-rings and seals for cylinders with snap ring type
end glands only.
For cylinders HC5340 and HC5394.

Seal kit for all SeaStar 1.7 and 2.4 helm pumps manufactured from 1984 thru 1989.

Seal kit for SeaStar HC5303, HC5312, HC5328, HC5329, HC5330,
HC5331, HC5335, HC5338, and HC5380 steering cylinders.
125 EM MV BJ ATM.
Includes thread locker.

Seal kit for HC5370 & HC5371 cylinders.

Seal kit for SeaStar HC5314, HC5326, and HC5336 steering cylinders.
150 EM MV BJ ATM.
Includes thread locker.

Seal kit for SeaStar HC5313, HC5327, and HC5332 steering cylinders.
135 EM MV BJ ATM.
Includes thread locker.

For use SeaStar HC5340, HC5341, HC5342, HC5343, HC5344,
HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375,
HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754,
& HC6755 front mount outboard hydraulic cylinders.
Includes seal glands, seal gland guide, O-rings & wrench.

Seal kit for Capilano HH0132 (250V), HH0217 (275V),
HH5250 (1250V), and HH5275 (1275V) helms. 

For use SeaStar HC5340, HC5341, HC5342, HC5343, HC5344,
HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375,
HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754,
& HC6755 front mount outboard hydraulic cylinders.     
Includes seal glands, seal gland guide, and O-rings.   
Does not include wrench.  

Shaft seal kit for Baystar 6.1 helm pumps.
Three screws, shaft seal and O-ring.

Spent travel tube for SAFE-T "QC", SAFE-T "TS",
and BIG-T rotary helms.

For MRB75 / 80.

This kit is designed to mount the helm
at a 20 degree angle to the mounting surface.
For raised or recessed mounts, four possible
mounting configurations are available.
Horizontal recessed mount requires HA5408 drain kit.
Not for use with BayStar helm pumps.

Designed to fit all brands of hydraulic trim tabs. Includes: - 12 volt motor - InstaTrim oil circulation pump (400 psi) - Solenoid valves - 18" wire harness with color coded wires - Biodegradable transmission oil and funnel - All fittings needed for installation.

Spent travel tube for NFB 4.2, NFB SAFE-T II, and HPS rotary helms.

Required for converting a SyTen steering cylinder to a current SeaStar Steering cylinder.

For Teleflex installation purposes. Includes O-rings.

Replacement shaft seal kit. Fits HRP-60 helms.

Replacement shaft seal kit. Fits HRP30-2 helms.

Replacement shaft seal kit. Fits HRP-38 helms.

Replacement shaft seal kit. Fits HRP-23 helms.

18" SeaStar cylinder hose kit.
Used to connect 3/8" diameter copper tubing to SeaStar steering cylinders.
Adapters and compression nuts included.

Fitting kit for 2nd station/autopilot to inboard or sterndrive applications.
This kit is used with systems plumbed with 3/8" diameter nylon or copper tube only.

Fitting kit to add a 2nd station or autopilot to an outboard steering system.
To be used when the system has been plumbed with SeaStar outboard steering hose only.
Includes non-vented fill plug for lower station helm.

3/8” compression X 1/4" MNPT straight adapter fitting.
Three per package. 

3/8" compression union.
Three per pack.

Elbow. 1/4" X 3/8". Three per package.

1/4” MNPT X 3/8” compression X 3/8" compression tee.
Three per package.

3/8" X 3/8" X 3/8". Three per package.

3/8" compression X 1/4" MNPT X 3/8" compression tee.
Three per package.

Female #6 SAE 45° swivel X 5/16" ID hose.
Brass construction.                      
Field attachable.                        
Fits MSH-5 hose.  

Model 7003.
Includes O-rings and a front seal.

Steering cable tube support kit with mounting bracket.
For older model outboards without tilt tubes,
low HP outboards or applications where design
interferes with standard tilt tube mounting.
Galvanized steel.