For throttle, choke, or other options. Attaches to Morse 33C cables.

Intended for use with electronic engines as a
remote, hand operated electronic control for engine RPM.
Two turns to WOT.
Counter clockwise rotation.
Single input.

Adjustable control head detent / friction settings.
"Posi-lock" gear lockout.
Selectable station transfer methods.
Station lockout capability.
Adjustable high idle settings.
Control head keypad lights dimmer.
Dual battery inputs.
Audible neutral indicator.

Glendinning electromechanical SA 2.
Smart actuators convert the electronic commands that are generated by the control head into specific positions at the engine, stern drive, hydraulic gear, water jet, and trolling valve.
Housed in rugged, corrosion resistant, aluminum enclosures.
Suitable for use with all mechanical engines or transmissions.
Up to 6 station remote control.
24 VDC.
Factory programed for 2 shift function.

Connector for Glendinning electric controls. For SA2 systems.

Glendinning electromechanical SA 2.
Smart actuators convert the electronic commands that are generated by the control head into specific positions at the engine, stern drive, hydraulic gear, water jet, and trolling valve.
Housed in rugged, corrosion resistant, aluminum enclosures.
Suitable for use with all mechanical engines or transmissions.
For use with ITC control heads for control of trim / tilt of engine’s drive unit.
Up to 6 station remote control.
24 VDC.
For shift and throttle.
Factory programed for port engine.

20 foot gear harness. Manufacturer number: 116-4-SC2-20.

Connector for Glendinning electric controls.
Length: 20 feet.
Connects with 3 pins.

Adjustable control head detent / friction settings.
"Posi-lock" gear lockout. Selectable station transfer methods.
Station lockout capability.
Adjustable high idle settings.
Control head keypad lights dimmer.
Dual battery inputs.
Audible neutral indicator.

Connector for Glendinning electric controls. 24 volt. Length: 40 feet.

For twin engine systems. 12 volts.

Glendinning electromechanical SA 2.
Smart actuators convert the electronic commands that are generated by the control head into specific positions at the engine, stern drive, hydraulic gear, water jet, and trolling valve.
Housed in rugged, corrosion resistant, aluminum enclosures.
Up to 6 station remote control.
12 VDC.
Factory programed for trolling valve.

Glendinning electromechanical SA 2.
Smart actuators convert the electronic commands that are generated by the control head into specific positions at the engine, stern drive, hydraulic gear, water jet, and trolling valve.
Housed in rugged, corrosion resistant, aluminum enclosures.
Suitable for use with all mechanical engines or transmissions.
For use with ITC control heads for control of trim / tilt of engine’s drive unit.
Up to 6 station remote control.
24 VDC.
For shift and throttle.
Factory programed for starboard engine.

For electronic engine control. 24 volt. Length: 20 feet.

Connector for Glendinning electric controls. 24 volt. Length: 40 ft.

Glendinning electromechanical SA 2.
Smart actuators convert the electronic commands that are generated by the control head into specific positions at the engine, stern drive, hydraulic gear, water jet, and trolling valve.
Housed in rugged, corrosion resistant, aluminum enclosures.
Suitable for use with all mechanical engines or transmissions.
For use with ITC control heads for control of trim / tilt of engine’s drive unit.
Up to 6 station remote control.
12 VDC.
For shift and throttle.
Factory programed for center engine.

13.5" black 3 spoke steering wheel with center trim cap.
Hard PVC grip.
Beautiful, high-detail styling.
Rugged construction for marine use.
U.V. and corrosion resistant materials.
Stylish center medallion included.
Fits standard 3/4" tapered shaft.
Suitable for mechanical steering.
This item is bulked packed and does not include the box.

Injection molded polyester.
A rudder locking device.
Designed for all tiller-controlled boats.
Includes: Special friction brake, 3 fairleads, one aluminum Clamcleat rope cleat, special friction rope and fasteners.

Plastic center trim cap for SeaStar Champion
& Stealth steering wheels.

Complete steering system includes NFB helm, high efficiency
XTREME steering cable design and new style bezel.
XTREME NFB single-cable systems are suitable for most
single station boats with a single non-power-assisted
outboard engine up to V-6 and minimal engine flutter or
steering instability.
Smoothest and lowest steering effort mechanical helm
offered in the market place yet still offers easy installation.
The kit contains the following:
- SHX7606 XTREME NFB Helm, Bezel, and Hardware Kit
- SSCX64 17' XTREME QC Steering Cable

Complete steering system includes NFB helm, high efficiency
XTREME steering cable design and new style bezel.
XTREME NFB single-cable systems are suitable for most
single station boats with a single non-power-assisted
outboard engine up to V-6 and minimal engine flutter or
steering instability.
Smoothest and lowest steering effort mechanical helm
offered in the market place yet still offers easy installation.
The kit contains the following:
- SHX7606 XTREME NFB Helm, Bezel, and Hardware Kit
- SSCX64 19' XTREME QC Steering Cable

Stainless steel 13-1/2" sport steering
wheel with finger grip rim and steering knob.
10° dish, 1/8" thick spoke and black center cap.
Fits standard 3/4" tapered shaft.

Polished stainless steel construction.
6 spokes.
10° dish with 3/8" spokes.
Black center cap.
Standard 3/4" tapered shaft.
Diameter: 22".
#1522211.

14" black steering wheel with 6
stainless steel spokes and hard PVC grip.
Beautiful, high-detail styling.
Rugged construction for marine use.
U.V. and corrosion resistant materials.
Stylish center medallion included.
Fits standard 3/4" tapered shaft.
Suitable for hydraulic & mechanical steering.

Polished stainless steel construction.
6 spokes.
10° dish with 3/8" spokes.
Black center cap.
Standard 1" straight shaft.
Diameter: 15.5".
#1521617.

14" black 3 spoke steering wheel with center pad.
Hard PVC grip.
Beautiful, high-detail styling.
Rugged construction for marine use.
U.V. and corrosion resistant materials.
Stylish center medallion included.
Fits standard 3/4" tapered shaft.
Suitable for mechanical steering.

Steering wheel maneuvering knob fits Sea-Dog®
steering wheels 230111, 230115, 230211, 230212, 230215, 230313, and 230315.
Attaches to the wheel for use in situations where maneuvering is excessive,
allowing the driver to turn the steering wheel more quickly.
Constructed of corrosion resistant investment cast 316 stainless steel.
Fits 1" x 3/4" oval tubing.
Display packed.

Steering wheel center cap. Wooden.

Rotary replacement steering cable.
Used with Morse 304411 and SeaStar Solutions 292525 steering helms.
Connects directly to engine tilt tube.
Length: 10'

Polished stainless steel construction.
6 spokes.
10° dish with 3/8" spokes.
Black center cap.
Standard 3/4" tapered shaft.
Diameter: 24".
#1522411.

Connector for Glendinning electric controls.

Connector for Glendinning electric controls. Length: 40 feet.

Connector for Glendinning electric controls. Starboard.

Ideal for inboards, stern drives and outboards.
For single or dual station use.
Controls uses 33C and 43C type cables. Not
suitable for use with Mercury® and OMC® OEM type
control cables. 43C cables require the additional 40
series hardware kit.
Highly polished corrosion resistant stainless steel
covers and handle.
Simple, rugged, compact design.
Mechanical advantage - shift 2.77:1/throttle 2.77:1.
Meets/exceeds all applicable industry standards.
Optional accessories:
- Neutral safety switch to prevent starting in gear.
- Hand lever extension.
- Gear detent kit.
- Additional hardware is required for twin station use.

Single-function control, each lever controls throttle or shift.   
Ideal for inboards, stern drives and outboards.
For single or dual station use.
Highly polished stainless steel cover.
Simple, rugged, compact design.
Easily adjustable throttle friction and shift detent feel.
Mechanical advantage - shift 2.77:1 / throttle 2.77:1.
Uses 33C and 43C type cables.
Meets/exceeds all applicable industry standards.
Optional accessories:
- Neutral safety switch to prevent starting in gear.
- Hand lever extension.
- Shift detent kit (if used in dual stations; use on main station only).
- Throttle hold kit.

Used to terminate connection on all electronic control systems.
A total of (2) terminating resistors are required per
system.
Actual size approximately 2" long.