Z6_GHK6HJC0OG6S20Q8HU3K6R0G63
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM5
0 Items
Z7_GHK6HJC0OG6S20Q8HU3K6R0GM7
Z7_GHK6HJC0OG6S20Q8HU3K6R0Q22
Home  >  Engine & Steering
|◀ ◀ 829 - 851 of 851 ▶ ▶|
View:
PowerTwist Plus V-belt
PowerTwist Plus composite V-belt. "The Zero Downtime V-Belt". Size: 1/2".
Item#:
BGEA-SECTION
Available:
In Stock
26.5000
Your Price:
23.85
FOOT
39110
40 series.
Stud diameter: 1/4".
Lever thickness: 1/8".
Length: 3/4".
Item#:
MOR39110
Manufacturer:
SeaStar Solutions
Available:
In Stock
14.7600
Your Price:
10.48
EACH
Flanged bearing
Custom built for smaller boats. Carefully machined to leave correct clearance. Brass shells, chemical resistant nitrile rubber interiors. Dimensions: 2-1/2" X 3-1/8" X 10".
Item#:
VMDFB21231810
Available:
Out of Stock
977.9000
Your Price:
831.22
EACH
Call to Order
Non-metallic bearing - INEZ
Non-metallic sleeve bearing. Features a dense, reinforced thermoset plastic shell. Precision fitted to 2-1/4" nitrile rubber shaft. Completely non-corrosive, perfect for specific installations Outside diameter: 2-15/16". Length: 9". Weight: 1.2 lbs.
Item#:
JSNINEZ
Manufacturer:
Duramax Bearings
Available:
In Stock
333.8000
Your Price:
283.73
EACH
Kongsberg 307145
High-density, UV-resistant nonmetallic jacket.
For use with MOR317310 vernier control head.
10-32 threaded stainless steel end.
Vernier cable only.
Length: 20'. 
Item#:
MOR307145-20
Available:
In Stock
72.4900
Your Price:
7.97
EACH
Terminal eye pin
Contains pin, retaining clip, nut and lock washer.
For connecting terminal eye to control and slave.
1-1/2” overall length.  
5/16” dia. stud, 19/32" overall length, 1/4-28 threads.
Brass construction.
Item#:
MOR301456
Manufacturer:
SeaStar Solutions
Available:
Out of Stock
29.5000
Your Price:
20.94
EACH
Call to Order
2030-0001
Replacement knob for Kobelt engine controls.
3/8-16 NC thread, 1-19/64" diameter.
Color: Black.
Item#:
KOB20300001
Manufacturer:
Kobelt
Available:
Out of Stock
29.7500
Your Price:
25.29
EACH
Call to Order
Flushing unit
Universal round cup motor flusher. No tools required, easy-to-use For use on all lower units with side water inlets.
Item#:
MOE099076-00
Manufacturer:
Moeller Marine
Available:
In Stock
6.4300
Your Price:
5.47
EACH
Rubber-lined brass bearing
Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: BOAT. Shaft/sleeve size: 1-3/8". Outside diameter: 1-7/8". Length: 5-1/2". Weight: 1.31 lb
Item#:
JSNBOAT
Manufacturer:
Duramax Bearings
Available:
Out of Stock
204.1500
Your Price:
173.52
EACH
Call to Order
Low-permeation fuel line
Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime while ensuring that there is no fuel flowback. Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034385-10. Intended for use with 3/8" lines. FOr Mercury two-prong clip style lines, 1998 and newer. Weight: 1 lb.
Item#:
MOE3438510LPA
Manufacturer:
Moeller Marine
Available:
In Stock
80.6400
Your Price:
68.54
EACH
36680
Clutch or throttle universal connection kit for single or dual station applications.
For use with 33C series cables.
Includes instructions.
Item#:
MOR36680
Manufacturer:
SeaStar Solutions
Available:
In Stock
128.8700
Your Price:
91.50
EACH
Universal, EPA compliant primer bulb.
Stainless steel bands.
Synthetic rubber bulb.
Stays flexible in cold or warm climates.
ID: 3/8".
Item#:
SIE188005EP1
Manufacturer:
SeaStar Solutions
Available:
In Stock
35.7100
Your Price:
25.36
EACH
36733
60 series cable clamp.
1-1/4" center to center bolt pattern.
Used with 37884 shim.
Plated steel.
Item#:
MOR36733
Manufacturer:
SeaStar Solutions
Available:
In Stock
4.7600
Your Price:
3.38
EACH
Hynautic 160031
Air pressure relief valve for R-04 & R-13 reservoirs.
Rated for 150 lb. 
Item#:
HYN160031
Manufacturer:
SeaStar Solutions
Available:
In Stock
92.5400
Your Price:
74.03
EACH

Universal, EPA compliant primer bulb
Stainless steel bands
Synthetic rubber bulb
Stays flexible in cold or warm climates
ID: 5/16".

Item#:
SIE188004EP1
Manufacturer:
SeaStar Solutions
Available:
In Stock
35.7100
Your Price:
25.36
EACH
Low-permeation fuel line
Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime while ensuring that there is no fuel flowback. Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034391-10. Intended for use with 3/8" lines. For Bombardier Johnson / Evinrude motors. Weight: 1 lb.
Item#:
MOE3439110LPA
Manufacturer:
Moeller Marine
Available:
In Stock
84.1600
Your Price:
71.53
EACH
35531
Dual cable clip bracket for use with 33C
throttle and shift cables.
Item#:
MOR35531
Manufacturer:
SeaStar Solutions
Available:
In Stock
52.6400
Your Price:
37.38
EACH
Rubber-lined brass bearing
Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: CORD. Shaft/sleeve size: 2-1/2". Outside diameter: 5-1/8". Length: 10". Weight: 4.38 lbs.
Item#:
JSNCORD
Manufacturer:
Duramax Bearings
Available:
In Stock
543.2100
Your Price:
461.73
EACH
Rubber-lined brass bearing
Rubber-lined brass sleeve bearing.
Adapts well to struts and stern-tube mounts.
Precision fitted for shafts with proper clearance.
Brass shells, chemical-resistant nitrile rubber interiors.
Stocking name: CORN.
Shaft/sleeve size: 2-1/2".
Outside diameter: 3-3/8".
Length: 10".
Item#:
JSNCORN
Manufacturer:
Duramax Bearings
Available:
Out of Stock
546.4700
Your Price:
464.50
EACH
Call to Order
317413
Eye terminal for 30C series cable.
5/16" eye, 10-32 threads.  
Aluminum construction.
Replaces Morse eye terminal  31980.
Item#:
TFX317413
Manufacturer:
SeaStar Solutions
Available:
In Stock
12.5000
Your Price:
8.87
EACH
Glendinning Pro-X 43C control cable

Built with a highly efficient "armored" core.
Stainless steel flat wire swaged over stainless steel cable.
Burnished to a smooth, close-tolerance finish.
Highly flexible and very strong.
Polymer liner minimizes internal friction for maximum efficiency.
Outer jacket is heavy-duty high density polymer.
Commonly used for jet boat shift cables.
Cable clamp fittings on each end.
Cable jacket diameter: approximately 7/16".
Stroke length: 3".

Made in the USA.

Available in various lengths, please select carefully.

Item#:
GMPA7200-SZ
Manufacturer:
Glendinning Marine
PRO-X cable A7100
33C cable features high efficiency armored core technology.
Specially processed polymer liner minimizes friction.
Heavy duty, high density, non-hydroscopic polymer jacket.
End fittings utilize stainless steel & nickel plated brass components.
Durable polymer seals & boots minimizes contamination & moisture from entering cable.
Comparison grades: Pro-X A-7100, SeaStar CCX633, Morse 301947, and Uflex Czero cables.
10-32 threaded ends.
Item#:
GMPA710-SZ
Manufacturer:
Glendinning Marine
CCX430 engine control cable
40 series SeaStar XTREME® control cable.
Premium core construction for maximum smoothness with minimal lost motion.
Super-tough HDPE jacket resists abrasion, UV, salt water, and petrochemicals. 
1/4-28 threaded ends, 3" travel, clamp connection one end, bulkhead connection on other end.
Has a 5" minimum bend radius design
Available in lengths: 6'-22'.
Item#:
TFXCCX430-SZ
Manufacturer:
SeaStar Solutions
|◀ ◀ 829 - 851 of 851 ▶ ▶|
View: