Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 20 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 17 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 15 feet.

Fits Mercury/Mercruiser motors from 1965 to current. Also fits Force motors 1993 to current. Stainless steel, brass and plastic construction.
8" minimum bend radius. Black UV-resistant polyethylene cover. Length: 14 feet.

Custom built for smaller boats. Carefully machined to leave correct clearance. Brass shells, chemical resistant nitrile rubber interiors. Dimensions: 2-1/4" X 3-1/8" X 9".

Non-metallic sleeve bearing. Features a dense, reinforced thermoset plastic shell. Precision fitted to 2-1/4" nitrile rubber shaft. Completely non-corrosive, perfect for specific installations Outside diameter: 3-1/8". Length: 9".

Cable clevis, pin, & cotter pin for 60 series control cable.
Pin diameter: 3/8".
Plated steel.

Eye terminal for 30C series cable.
5/16" eye, 10-32 threads.  
Red plastic.

Cable clevis, pin, & cotter pin for 40 series control cable.
Pin diameter: 1/4".
Plated steel.

Designed for harsh environments.
Stainless steel keyboard.
Submersible.
Covered by an extended warranty.
Double.

Pin only, for connecting terminal eye to control and slave.
1-1/2” overall length.  
5/16” dia. stud, 19/32" overall length, 1/4-28 threads.
Brass construction.

Ball joint with quick release stud.
Plated steel.
For 40 series cable.
1/4" stud.

Ball joint with quick release stud.
Plated steel.
For 60 series cable.
5/16" stud.

Cable clevis, pin, & cotter pin for 60 series control cable.
Pin diameter: 5/16".
Plated steel.

Reinforced polypropylene and metal construction. Suction cups attach to side water inlets or intake. May be used to run motor while out of water. Attaches easily to garden hose.

Stainless steel replacement lever for
SeaStar CH5400P & CH5600P engine controls.  
Does not include knob.  
Length: 7-3/4”.

Cable clevis, pin, & cotter pin for 40 series control cable.
Pin diameter: 5/16".
Plated steel.

30 series cable clamp.
Used with 31538 shim.
1" center to center bolt pattern.
Plated steel.

40 series cable clamp.
1" center to center bolt pattern.
Used with 31538 shim.
Plated steel.

30 series.
Stud diameter: 1/4".
Lever thickness: 3/16".
Length: 23/32".

Cable clamp shim for 30 and 40 series control cables.
1" center to center bolt pattern.
Overall dimensions: 1-1/2" X 1/2".
Plated steel.

40 series.
Stud diameter: 1/4".
Lever thickness: 3/16".
Length: 7/8".

Designed for harsh environments.
Stainless steel keyboard.
Submersible.
Covered by an extended warranty.

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: CALM. Shaft/sleeve size: 2". Outside diameter: 3". Length: 8". Weight: 3.81 lbs.

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: CALL. Shaft/sleeve size: 2". Outside diameter: 2-5/8". Length: 8". Weight: 2.88 lbs.

Universal rectangular cup motor flusher unit. No tools required, just slip over inlets. Quickly removes build-up with a simple flush. Removes contaminates from lower unit cooling systems. For use on all lower units with side water inlets. Product # 099076-00.

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: CART. Shaft/sleeve size: 2-1/4". Outside diameter: 3-1/8". Length: 9". Weight: 4.13 lbs.

Manganese bronze construction. Length: 9". Shaft size: 1-1/4". Key way: 1/4".

Ball joint with quick release stud.
Plated steel.
For 30 series cable.
10-32 stud.

T-Style handle, 10-32 threads.

Non-metallic sleeve bearing. Features a dense, reinforced thermoset plastic shell. Precision fitted to 1-1/2" nitrile rubber shaft. Completely non-corrosive, perfect for specific installations Outside diameter: 2". Length: 6". Weight: .5 lb.

Non-metallic sleeve bearing. Features a dense, reinforced thermoset plastic shell. Precision fitted to 2-1/4" nitrile rubber shaft. Completely non-corrosive, perfect for specific installations Outside diameter: 3". Length: 9". Weight: 1.5 lbs.

Cable clevis, pin, & cotter pin for 30 series control cable.
Pin diameter: 3/16".
Plated steel.

Adapter kit for Johnson/Evinrude 1973 and later models.
Fits 55 HP through 235 HP outboard motors.  
For use with 33C series cables.
Includes instructions. 

Manganese bronze construction. Length: 7". Shaft size: 1-1/4". Key way: 1/4".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 156".