Adapts well to struts and stern-tube mounts.
Precision fitted for shafts with proper clearance.
Brass shells, chemical-resistant nitrile rubber interiors.
Stocking name: BLOW.
Shaft/sleeve size: 1-1/4".
Outside diameter: 2-1/8".
Length: 5".

Bored to accept a shaft bearing. Internally threaded. Includes two setscrews. Shaft size: 1-1/4".

Non-metallic sleeve bearing. Features a dense, reinforced thermoset plastic shell. Precision fitted to 2-1/2" nitrile rubber shaft. Completely non-corrosive, perfect for specific installations Outside diameter: 3-3/8". Length: 10". Weight: 1.75 lbs.

Clutch detent kit for single station Twin SR controls.
Provides positive detent at forward, neutral and reverse position.

Adjustable pivot for Morse SF engine control.
For use with 33C series cables.

30 series.
Stud diameter: 5/16".
Lever thickness: 7/16".
Length: 1".

Non-metallic sleeve bearing. Features a dense, reinforced thermoset plastic shell. Precision fitted to 2-1/2" nitrile rubber shaft. Completely non-corrosive, perfect for specific installations Outside diameter: 3-1/8". Length: 10". Weight: 1.45 lbs.

Secures outboard motors to transoms. Works on all outboards with wing-type screws. EDC-coated steel construction. Includes a padlock that fits inside the tube.

33LU cable with Tee knob
Easy to install and operate
For remote control of choke, throttle or other applications
Solid stainless core in a non-metallic liner
Cable can be shortened to needed dimensions
Size: 10 feet.

Provides outboard engines with more fuel for quick starts. Includes safety check valves. Size: 3/8".

Moeller low-permeation fuel line assembly - 5/16". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime. while ensuring that there is no fuel flowback Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034395-10. Intended for use with 5/16" lines. Weight: 1 lb.

Connection kit for Mercruiser engines.  
For use with 33C series cables.

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime while ensuring that there is no fuel flowback. Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 033389-10 Intended for use with 3/8" lines. Length: 12 feet. Weight: 1 lb.

30 series.
Stud diameter: 1/4".
Lever thickness: 5/16".
Length: 15/16".

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: BUCK. Shaft/sleeve size: 1-3/4". Outside diameter: 2-5/8". Length: 7". Weight: 2.81 lbs.

40 series. Diameter: 1/4".

Hardware kit for Twin S control.

For use with engine control systems. 1/4".

Single cable clip bracket for use with 33C
throttle and shift cables.

Throttle friction kit for use with S and Twin S controls.
Includes installation instructions.

Graphtex Ultra shaft packing material. A unique blend of graphite fibers and PTFE. Thermal conductive, strong and very durable. Dissipates heat away from stuffing boxes. Thickness: 3/16". Length: 2 feet.

Graphtex Ultra shaft packing material. A unique blend of graphite fibers and PTFE. Thermal conductive, strong and very durable. Dissipates heat away from stuffing boxes. Thickness: 7/16". Length: 2 feet.

Graphtex Ultra shaft packing material. A unique blend of graphite fibers and PTFE. Thermal conductive, strong and very durable. Dissipates heat away from stuffing boxes. Thickness: 1/2". Length: 2 feet.

Graphtex Ultra shaft packing material. A unique blend of graphite fibers and PTFE. Thermal conductive, strong and very durable. Dissipates heat away from stuffing boxes. Thickness: 5/16". Length: 2 feet.

Graphtex Ultra shaft packing material. A unique blend of graphite fibers and PTFE. Thermal conductive, strong and very durable. Dissipates heat away from stuffing boxes. Thickness: 3/8". Length: 2 feet.

Graphtex Ultra shaft packing material. A unique blend of graphite fibers and PTFE. Thermal conductive, strong and very durable. Dissipates heat away from stuffing boxes. Thickness: 5/8". Length: 2 feet.

Graphtex Ultra shaft packing material. A unique blend of graphite fibers and PTFE. Thermal conductive, strong and very durable. Dissipates heat away from stuffing boxes. Thickness: 3/8". Length: 10 feet.

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: BROW. Shaft/sleeve size: 1-3/4". Outside diameter: 2-3/8". Length: 7". Weight: 2.31 lbs.

Moeller low-permeation fuel line assembly - 3/8". Meets EPA requirements for fuel lines. Solid hydrocarbon and solvent resistant construction. Dual internal check valves ensure a rapid prime. while ensuring that there is no fuel flowback Includes primer bulb, clamps, and hardware. Uses O-rings on all fittings to prevent leaks. Moeller item number 034394-10. Intended for use with 3/8" lines. For Yamaha motors. Weight: 1 lb.

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: BRAD. Shaft/sleeve size: 1-1/2". Outside diameter: 2-3/8". Length: 6". Weight: 1.44 lb.

Non-metallic sleeve bearing. Features a dense, reinforced thermoset plastic shell. Precision fitted to 2" nitrile rubber shaft. Completely non-corrosive, perfect for specific installations Outside diameter: 2-5/8". Length: 8". Weight: .8 lb.

Allows two clutch or two throttle cables to be connected to a single cable leading aft to the engine.
Ideal for parallel dual station installations when two-lever single function controls are used.
Recommended for installations with long or difficult cable paths to eliminate undesirable
cable bends that cause backlash and reduced efficiency.
For use with 30 series cables.
Includes instructions.

Brass stop collar.
3/32" diameter hole for wire.
For connecting 20 and 30L series cable.
Dimensions: 3/8" X 3/8". 

30 series.
Stud diameter: 5/16".
Lever thickness: 13/32"
Length: 1-1/16".

Braided to specific tolerances.
Made from quality rovings.
Impregnated with natural lubricants.
A traditional material with an affordable price.
Size: 3/8".