OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 816".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 744".

OEM direct-replacement control cable Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 720".

OEM direct-replacement control cable. Has a 4" minimum bend radius design. Super-tough HDPE jacketed. Resists abrasion, UV, salt water, petrochemicals. 10-32 threaded ends. Length: 840".

40 series cable clamp and shim kit.
Includes 31532 cable clamp and 31538 shim.
Also includes 2 nuts, lock washers, and bolts  
Plated steel.

Complete cylinder and piston replacement assembly.
For ST-06 Hynautic control heads.

Universal attachment kit for inboards and outdrives.  
For use with 33C series cables.  
Includes two SeaStar CA-37701 ball joints and two CA-35074 brackets.

Fits Kobelt 2016 engine control.
For use with 33C series cable.

High-density, UV-resistant nonmetallic jacket.
For use with MOR317310 vernier control head.
10-32 threaded stainless steel end.
Vernier cable only.
Length: 14'.

High-density, UV-resistant nonmetallic jacket.
For use with MOR317310 vernier control head.
10-32 threaded stainless steel end.
Vernier cable only.
Length: 6'. 

Cast bronze. Shaft size: 1-3/8".

Prevents you from starting while in gear and activates backup lights. May activate a buzzer when control is moved to reverse. For use with Allison MT 30 and 40, HT 70 transmissions. Manufacturer's number: B45184. Color: Black.

Used in conjunction with BayStar and SeaStar kits.
Required on some outboard applications.
 For use with Teleflex hydraulic steering cylinder HC5345 and HC5358.

Dual connection throttle and shift connection kit. Connects two 3300 type engine control cables. Includes instructions and 14 pieces of hardware.

Replacement knob for Kobelt engine controls.
3/8-16 NC thread, 1-19/64" diameter.
Color: Red.

Fits Kobelt 2009 engine control.
For use with 33C series cable.

For test runs and coolant system flushing.
Designed to fit most outboard motors, 15 HP and under.
Easy slip-on fit.
Dimensions: 7.4" X 3.6".

33C cable features high efficiency armored core technology.
Specially processed polymer liner minimizes friction.
Heavy duty, high density, non-hydroscopic polymer jacket.
End fittings utilize stainless steel and nickel plated brass components.
Durable polymer seals & boots minimizes contamination and moisture from entering cable.
Comparison grades: Pro-X A-7100, SeaStar CCX633, Morse 301947, and Uflex Czero cables.
10-32 threaded ends.

Length: 4.5'.

33LU cable with Tee knob. Easy to install and operate. For remote control of choke, throttle, or other engine appli Solid stainless core in a non-metallic liner. Cable can be shortened to needed dimensions. Size: 30 feet. Weight: 4 lbs.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 25 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 20 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 15 feet.

33LU cable with Tee knob.
Easy to install and operate.
For remote control of choke, throttle or other applications.
Solid stainless core in a non-metallic liner.
Cable can be shortened to needed dimensions.
Size: 5 feet.

Universal, EPA compliant primer bulb.
Stainless steel bands.
Synthetic rubber bulb.
Stays flexible in cold or warm climates.
ID: 1/4".

Synthetic yarn, thoroughly impregnated with PTFE. Coated with PTFE dispersion and a break-in lubricant. Designed to resist water, oils, and chemicals. Color: White. Thickness: 1/4". 24 feet per roll.

Synthetic yarn, thoroughly impregnated with PTFE. Coated with PTFE dispersion and a break-in lubricant. Designed to resist water, oils, and chemicals. Color: White. Thickness: 1/8". 70.9 feet per roll.

Dual station kit for Twin S controls.
For 33C series cables.

Dual station kit for S & Twin S controls.  
2 required for Twin S control.
For 43C series cables.

Quick release cable mounting clip for OMC.
Stainless steel.
For Morse 33C style cables (30 series only).

Replacement knob for SeaStar engine controls.
3/8-24 NF thread, 1-5/8" diameter.
Color: Red

Replacement knobs for SeaStar engine controls.
3/8-24 NF thread, 1-5/8" diameter.
Color: Black

Reduces outboard engine speed. Mounts on the anti-cavitation plate. Locks up and down. Fits outboard motors up to 25 HP.

Extends behind a propeller. Utilizes prop wash energy, which is normally lost. Unique hydrodynamic design. Helps stabilize bow-light boats. Easy to install. Marine-grade anodized aluminum construction.

Doel-Fin hydrofoil.
Guaranteed unbreakable.
Gives your boat greater stability, better gas mileage.
Designed for use with small and large motors.

Synthetic yarn, thoroughly impregnated with PTFE. Coated with PTFE dispersion and a break-in lubricant. Designed to resist water, oils, and chemicals. Color: White. Thickness: 3/8". 12.2 feet per roll.

Bored to accept a shaft bearing. Internally threaded. Includes two setscrews. Shaft size: 1-1/4".