60 series. Diameter: 5/16".

Dual station kit for SeaStar CH5600P control.
For use with 33C series cables.
Includes instructions. 

Rubber-lined brass sleeve bearing. Adapts well to struts and stern-tube mounts. Precision fitted for shafts with proper clearance. Brass shells, chemical-resistant nitrile rubber interiors. Stocking name: BASE. Shaft/sleeve size: 1". Outside diameter: 2". Length: 4". Weight: 1.3 lb.

Dual station adapter kit for adapting throttle
or clutch from 33C series cable to 43C series cable.  
Includes instructions.

Dual station kit for Twin S controls.
For 33C series cables.

Dual station kit for S & Twin S controls.  
2 required for Twin S control.
For 43C series cables.

Quick release cable mounting clip for OMC.
Stainless steel.
For Morse 33C style cables (30 series only).

Replacement knob for SeaStar engine controls.
3/8-24 NF thread, 1-5/8" diameter.
Color: Red

Replacement knobs for SeaStar engine controls.
3/8-24 NF thread, 1-5/8" diameter.
Color: Black

Reduces outboard engine speed. Mounts on the anti-cavitation plate. Locks up and down. Fits outboard motors up to 25 HP.

Extends behind a propeller. Utilizes prop wash energy, which is normally lost. Unique hydrodynamic design. Helps stabilize bow-light boats. Easy to install. Marine-grade anodized aluminum construction.

Doel-Fin hydrofoil.
Guaranteed unbreakable.
Gives your boat greater stability, better gas mileage.
Designed for use with small and large motors.

Synthetic yarn, thoroughly impregnated with PTFE. Coated with PTFE dispersion and a break-in lubricant. Designed to resist water, oils, and chemicals. Color: White. Thickness: 3/8". 12.2 feet per roll.

Dual station kit for Twin SR control.
For 33C series cables.
Two required for twin lever controls. 

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 28 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 26 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 24 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 30 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 11 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 10 feet.

Fits BRP/OMC/Johnson/Evinrude controls, 1979 to current. Also fits OMC Turbo Jets with OMC side mount controls. Stainless steel, brass and plastic construction. 8" minimum bend radius. Length: 6 feet.

For use with SeaStar CH4400 series controls.
Kit includes both red and black control caps,
detent springs, detent balls, cotter pins, cable clamps,
cable brackets, washers, screws and pivots.
Includes fittings to connect 33C series cables to CH4400 control head.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 20 feet.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 15 feet.

Vernier cable only.
Great for throttles or other applications where
precise control is desired.
Bare conduit at output end with a .075 stainless
steel wire.
For use with MOR371310 vernier control head.
Length: 10 feet.

Eye terminal for 40C series cable.
5/16" eye, 1/4-28 NF threads.  
Steel construction. 

Four-button keypad.
One lever to control throttle / gear.
One lever to control bucket.

Swivel socket for steering hardware.
Constructed of cast bronze.
Complete with cotter pin and setscrew.
3/4" NPT.

Single or dual station clutch kit for Twin Disc.  
For use with 30 series cable.  
Includes installation instructions.

Ramie yarn, thoroughly impregnated with paraffin. Square plait construction, coated with mineral oil. Designed to resist water, oils, and chemicals. Color: Off-white. Thickness: 1/8". 114.5 feet per roll.

Eye terminal end to attach a 30C series cable to a
SeaStar SR engine control.
3/16" eye for stud, 10-32 threads.
Black plastic construction.

Eye terminal end to attach a OMC cable to a engine control.
Red plastic construction.  

Ergonomic design allows you to effortlessly control
both engines throttle & transmission at the same time.  
Plug-in” remotes come with 25’ of cable.
For use with SA2 smart actuator & EEC3 control processors.  
Designed for twin engine systems.

Cummins throttle connection kit.
For single or dual stations.  
For use with 33C series cables.
Includes instructions. 

Fitting package for ST-06 throttle slave.

Fitting package for ST-04 throttle slave.