Schroeder on-board coalescing diesel fuel filter.
Features an automatic drain design.
Low investment cost due the economical design.
Long service life of the element yields low operating costs.
Seamless installation due to the plug and play.
Easy adaption to the on-board power supply.
Unsurpassed water removal for ULSD.
24 volt DC.
2.6 GPM.
Port size: 3/4" BSP.

Connects fuel line assemblies and fuel tanks. Built to OEM specifications from chrome-plated brass. For Chrysler / Force engines. 1/4".

Built to strict OEM standards. Designed for use with Mercury outboard systems. Attaches to the fuel hose on the engine side. Plastic construction. Size: 3/8".

Female two-prong clip style engine connector.
3/8" hose barb for fuel hose connection.
Built to OEM specifications for replacement parts.
Uses O-rings for a tight, leak-free connection.

For the Racor 500FG series.
Includes:
- Clear bowl
- Drain plug (1/2")
- Sensor screw cap
- Seals.

Replacement filter element.
5 micron.
Appropriate for drinking water.

Connects fuel line assemblies and fuel tanks. For Johnson / Evinrude. 1/4".

Stainless steel and ceramic construction.
Durable plastic connector housing.
Metal pin tip extends into water collection bowl.
External pigtail harness with 18 AWG wires.

Rated for 30 GPH. Gasoline only. 10 micron filter. Port connection 1/4" NPTF.

Rated for 30 GPH. Gasoline only. 10 micron filter. Replaces filter on Racor 320R-RAC-01.

10 Micron (3213) is Replace filter to Unit B32013 Weight: 1.2 lb

Rated for 30 GPH. Gasoline only. 10 micron filter. Replaces filter on Racor B32014.

Protects an engine from particles that can lead to premature wear, damage, or failure.
OD: 3-11/16".
Length: 5-13/32".
Maximum operating pressure: 100.
Thread: 3/4" - 16.

Racor fuel filter / water separator turbine
with three-stage filtration.
Provides maximum protection of diesel engine
components.
Effectively removes contaminants from fuel.
Filters out water, silica, sand, dirt, rust and more.
See-through bowl.
2 micron element included.
Max flow rate: 60 GPH.
Port Size: 1/2" ORB.
Replacement element: 2010SM series.
Dimensions: 11-1/2"H X 5.8"W X 4.8"D.

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 30 microns.

Connects fuel line assemblies and fuel tanks.
Yamaha.
3/8".

Turbine series fuel filter / water separator.
For 1000 series assemblies.
A redesigned filter with a center bail design.
Separates fuel from water with Aquabloc media.
Filter is 10 microns.

A replacement Turbine series filter element for Racor fuel/water separator units.
Features several improvements over previous models:
- A side-seam, center-bail design, which eliminates the metal "V-clip"
- Increased bail strength, by moving the bails to the top of the filter
- Improved capacity for dirt/soil/scum.
For 1000 series Racor fuel filter assemblies.
Includes a T-handled O-ring and lid seal kit.
Filter is 2 microns.

Built to strict OEM standards. Designed for use with Mercury outboard systems. Attaches to the fuel hose on the engine side. Size: 3/8".

Built to strict OEM standards. Designed for use with Suzuki outboard systems. Attaches to the fuel hose on the engine side. Size: 5/16".

Connects fuel line assemblies and fuel tanks. For Nissan / Tohatsu. 3/8".

Connects fuel line assemblies and fuel tanks. Johnson / Evinrude. 3/8".

Includes gasket and O-ring. 2 micron. For secondary/final filtration. Brown.

Has a water probe port and plug. For use with 900/1000 turbine series filters. Includes O-ring.

Non-slip nylon belt with a 1/2" square drive. Fits spin-on filters up to 6" diameter.

Connects fuel line assemblies and fuel tanks. For Suzuki. 1/4".

For use with turbine series 900 and 1000MA. Includes O-rings and bowl plug.

Rated for 30 GPH. Gasoline only. 10 micron filter. Replaces filter on Racor 320R-RAC-02.

Built to strict OEM standards. Designed for use with Honda outboard systems. Attaches to the fuel hose on the engine side. Size: 3/8".

Engineered to repel water and remove contaminates. For model 120A filter assemblies. Filter is 2 microns. Rated for 15 GPH.

Rated for 30 GPH. 10 micron filter. Fits the Racor 120A, 120R, 122R, and 140R.

Engineered to repel water and remove contaminates.
Used as a primary filter for 500 series turbine assemblies.
Rated for 60 gallons per hour. Filter is 30 microns.

Rugged corrosion-resistant steel construction. Wide studded band prevents crushed filters. Fits 2-13/16" to 3-5/32" diameter oil filters.

Outboard complete filter 2 Micron element, see-thru bowl, primer bulb Max flow rate: 60 GPH/340 Iph Center threads: 1-14 Head port size: 3 Clean pressure drop: 30 PSI/207 kPa Element removal underbowl: 1"/25.4 mm Max Pressure: 7 PSI/48 kPa Operating temp: 1"/25.4 mm Height: 9.38" X 4" X 4".

Inboard/Outboard complete filter 2 Micron element, see-thru bowl, primer bulb Max flow rate: 60 GPH/340 Iph Center threads: 1-14 Head port size: 3 Clean pressure drop: 30 PSI/207 kPa Element removal underbowl: 1"/25.4 mm Max Pressure: 7 PSI/48 kPa Operating temp: 1"/25.4 mm Height: 9.38" X 4" X 4".