Combination displacement lift / siphon pump. Suitable for transferring diesel, oil, or water. Clear tubing. Not intended for PVC-attacking solvents.

Comes with kit of tubes and hoses, reducing foot and adapter Use for bilges, sump tanks, transfer, or oil changing from engine crank case, stern drive or inboard. Tube to insert in dipstick hole for oil pump out. Tough marine plastic will not rust or corrode. No priming to start pump action. Red discharge tube, gray hand pump. Weight: .75 lb

Thirsty-Mate high capacity super pump. Coast Guard approved for commercial use. Model 519CG#2. Three strokes per gallon, rated for 22 gallons per minute. Inlet hose is 24", outlet hose is 72". Length: 24". Diameter: 3". Weight: 8.3 lbs.

Continuous duty motor and thermal overload protection No harm if pump runs dry Self priming can install above water line Calibrated for correct water movement for lively bait Use with 15 to 30 gallon tanks Includes 3/4" strainer Uses: Diesel fuel, liquid transfer jobs, dockside pumping, dewatering or circulation, engine oil changing, oil elastometer Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb Weight: 4 lbs

Use for diesel fuel transfer, liquid transfer jobs, dockside pumping, dewatering or circulation, engine oil changing Fitted with oil resistant elastomers Self-priming, may be mounted above the waterline Heavy-duty ball bearings, thermal overload protection Continuous duty motor provides quiet operation & smooth flow Runs dry without harm to pump Includes plug-in ports for easy installation, two garden hose ports and two 3/4" hose barb ports Includes a 3/4" inlet strainer Weight: 6 lbs

For use with 1 to 5 gallon accumulator tank Designed for 6 or more fixtures Quiet smooth flow No harm if runs dry. Strainer included. Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb. Weight: 6 lbs

For use with 1 to 5 gallon accumulator tank Designed for 6 or more fixtures Quiet smooth flow No harm if runs dry. Strainer included. Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb. Weight: 6 lbs

For use with 1 to 5 gallon accumulator tank. Designed for 6 or more fixtures. Quiet, smooth flow. Not harmed if it runs dry. Strainer included. Plug-in ports, easy to install. May be attached to garden hose or 3/4" hose barbs.

For fresh or salt water. Not harmed if runs dry. Has an automatic shut off function. Includes pump, strainer, hose and nozzle. Uses plug-in ports, easy to install. Rated for 40 psi.

For use with 1 to 5 gallon accumulator tank Designed for 6 or more fixtures Quiet smooth flow No harm if runs dry. Strainer included. Plug-in ports, easy install: 2 for garden hose and 2 for 3/4" hose barb. Weight: 6 lbs

Designed for up to 5 fixtures Smooth water flow, pumps over 3.3 GPM Delivers smooth, steady water flow from 1 to 3 GPM without the need for an accumulator tank Special internal bypass feature eliminates pulsating water and pressure switch chatter Install with new Flojet strainer (not included) to protect pump from debris. Dimensions: 3.75" H x 6.3" W x 8.2" L Weight: 3.9 lbs

An auxiliary water pump. 1" inlet and outlet. 12 volt.

A centrifugal booster pump. Bronze construction. 1/2" inlet and outlet. 12 volt.

Fynspray rocker action pump. May be used with either fresh or salt water Self-priming. Tough non-corrosive black plastic and chrome steel. Weight: 1 lb.

Fynspray rocker action pump.
May be used with either fresh or salt water.
Self-priming.
Tough non-corrosive white plastic and chrome steel.

Replaceable wear plate to extend service when handling abrasive fluids
9.5 GPM - 115 Volt Motor - 1/3 HP - 1/2" NIPT
Dimensions: 7-3/4"H x 7-1/4"W x 10-1/2"L

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 2A Pulley Belt Grooves - 1" NIPT - 26 GPM Weight: 15.25 lbs

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1B Pulley Belt Grooves - 1" NIPT - 26 GPM Weight: 14.75 lbs

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 2A Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 21.65 lbs

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt model Capable of operating through a wide range of speeds and in either rotational direction 1b Pulley Belt Grooves - 1-1/4" NIPT - 62 GPM Weight: 22.8 lbs

A compact, general-purpose pump. Bronze body. Neoprene impeller. 3/8" ports. Rated for 3.4 gallons per minute at 10 feet. Stainless steel shaft. 6 foot cord, with AC plug.

A compact, general-purpose pump. Bronze body. Nitrile impeller. 3/8" ports. Rated for 3.4 gallons per minute at 10 feet. Stainless steel shaft. 6 foot cord, with AC plug.

Use for engine cooling, wash down, circulation, and general purposes on-board or dockside Self-priming with ability to operate in either direction at variable speeds Removable end cover for easy impeller service 11.3 GPM - 1/2" NIPT - 5/8" diameter shaft Weight: 4.51 lbs

Bronze construction. Nitrile impeller. Lip seal, stainless steel shaft. 1/2" ports, horizontal orientation.

Electromagnetic clutch pumps equipped with a powerful electric clutch for convenient remote operation 12 volt pump Capable of operating through a wide range of speeds and in either rotational direction. Dimensions: 2A Pulley Belt Grooves - 2" NIPT - 83 GPM Weight: 30.5 lbs

Has a high capacity flow rate and horizontal-oriented ports. Rated for 4710 GPH. Self-priming up to 15 feet. Mechanical face type shaft seal. Nitrile impeller. Fitted with single "B" groove pulley. 12 volt.

Use for engine cooling, wash down, circulation, and general purposes on-board or dockside Self-priming with ability to operate in either direction at variable speeds Removable end cover for easy impeller service 83 GPM - 2" NIPT - 1" diameter shaft Weight: 21 lbs

Nitrile impeller.
115 vac.
Rated for 6 gallons a minute.
Easy to service and maintain.
Tolerates fairly abrasive wear.

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.
12 volt DC.

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.

Can deliver almost 7 GPM at open flow. Equipped with pressure-cast bronze body. Features a reusable O-ring type end cover seal. 1/2" internal pipe thread and 1" external hose barb. Includes 2 port adapter. 12 volt DC. Weight: 6.06 lbs

Bronze impeller pump. Can handle small bilge debris. Flow rate: 8 GPM. 12 volts.

Can deliver almost 7 GPM at open flow.
Equipped with pressure-cast bronze body.
Features a reusable O-ring type end cover seal.
1/2" internal pipe thread and 1" external hose barb.
Includes 2 port adapter.
24 volt DC.

Engine Cooling Pump & General Purpose Pumping 3.7 GPM, 1/4" NIPT Port Connections. Pedestal mount, corrosion resistant bronze pumps: Use for engine cooling, washdown, circulation, & general purposes on-board or dockside. Bronze or stainless steel shaft installed with permanently lubricated ball bearings for long life & heavy-duty service. Self-priming with ability to operate in either direction at variable speeds. Capacity ranges from 3 GPM to 83 GPM with varied port configurations and sizes. Most models have replaceable cams/wearplates for extended product life. Removable end cover for easy impeller service. Standard impeller for these pump models is neoprene. (some have alternative oil resistant nitrile impellers available.)

A variable speed drive system. Adds pressure-sensor control to everyday pumps. Senses real-time changes in pressure. Provides smooth and pulsation-free performance. Works on most water presure systems. 12 volts.

Plastic pump body. Designed to provide constant water pressure. 3/8" ports. Automatic flow from tank to faucet. 12 volt DC.